Five causes and solutions of normal dehydration but weak washing and weak washing of washing machine

1, it may be that the washing winding coil of the motor is broken, and the large magnetic field cannot be generated normally, and the rotor constitutes cutting.

2. It may be that the capacity of the capacitor is reduced, but it can meet the work of the rotating coil, indicating that the capacitor is broken.

Five causes and solutions of abnormal dehydration of washing machine

1, pay attention to check whether there is a lot of foam in the inner cylinder of the washing machine, because this will cause the washing machine to be unable to reset smoothly. In this case, the drainage system of the washing machine will be blocked, and the drainage treatment cannot be carried out. At this time, everyone should pay attention to taking down the drainage screen of the washing machine and thoroughly cleaning it, and also check the drainage place to see if there are many impurities. This also needs to be cleaned before the washing machine can be used normally.

2. Check whether there are many bubbles in the inner cylinder of the washing machine, which will lead to the failure to reset the water level switch of the washing machine and block the drainage system of the washing machine accordingly. At this time, everyone will encounter the situation that the washing machine can't dehydrate. So what should I do at this time? Pay attention to remove the drain filter of the washing machine and clean it. At the same time, pay attention to the possibility of impurities in the drain pipe, which should also be cleaned. At this time, the washing machine can be dehydrated.

Pay attention to check whether there are many clothes in the washing machine. At this time, the washing of the washing machine will lead to the imbalance of the internal clothes. At this time, the washing machine will automatically adjust because of the imbalance of clothes, and will also be adjusted to low speed. Naturally, there will be a bad dehydration effect. What should I do at this time? Everyone needs to pay attention to pause the setting of the washing machine, then adjust the clothes inside to ensure a horizontal state, and then you can dehydrate normally.

4. A capacitor is connected in series with the starting winding of the motor of the dehydration barrel of the washing machine, which exists to improve the starting characteristics of the motor. Under normal circumstances, after the power of the washing machine is turned on, the motor of the dehydration barrel will hum, but it will not rotate. In this case, everyone needs to unplug the power plug of the washing machine, and then check whether the capacitor is faulty, or directly replace it with a new capacitor to see if it can work normally, so as to know whether the capacitor is faulty.

The washing machine doesn't turn, dehydration can turn, but it can't. What's the matter?

1, either the brakes are broken or the motor is broken.

2. Open the back cover of the washing machine and turn the motor by hand to see if it can turn when the power is off.

3. If the rotation is difficult, just check whether the motor is braked. If so, take the brakes off.

4, check whether the belt is loose, check the pawl and clutch, see whether the brake is tight or whether the mechanism on the drum cover is broken.

5. Some motors with clutch have high temperature, so the starting capacitor may be broken, or the motor can't start because the thread ends fall off. If there is no clutch, then see if the motor is stuck. Don't idle the belt for the first time. If there is no clutch, there is something wrong with the starting capacitor.