The lampshade of the lamp will become dimmer and dimmer because of dust. How to maintain lamps daily?

Lamps are easy to absorb dust when used for a long time, especially after summer, many bugs will attach to lamps, so regular cleaning and maintenance is very important. 1. Correct installation is the premise: Correct installation of lamps is the premise of prolonging the service life of lamps. If it is not installed correctly, the lamps will easily break down and sometimes even explode, which is very dangerous. At home, you should pay special attention to the installation of lamps in the bathroom and kitchen. The lamp in the bathroom must be fitted with a damp-proof lampshade, otherwise the service life of the lamp will be greatly shortened; Kitchen lamps should pay special attention to prevent oil fume, because the accumulation of oil dirt will affect the illumination of lamps; Choose a light lampshade with good light transmittance, but it is easy to stick dust, so it should be wiped frequently to avoid affecting the light transmittance; And generally speaking, kitchen and bathroom lamps should not be placed in the position where water vapor is easy to condense, so as not to burst. 2. Early replacement of aging lamps: lamps that have been used for a long time will appear red or have shadows at both ends, so they should be replaced in time to prevent unsafe phenomena such as ballast burning. Generally speaking, when buying a lamp, the effective time will be marked on the bulb, and the aged lamp will be replaced regularly.

First of all, don't be busy installing the lamps after you buy them back. You should read the label and installation instructions of lamps carefully and install and use lamps according to the instructions, otherwise it may be dangerous. Secondly, according to the light source parameters provided by the sign, replace the aging lamp in time. If it is found that the two ends of the lamp are red, the lamp is black or shadowed, and the lamp is not bright, the lamp should be replaced in time to prevent unsafe phenomena such as ballast burning.

Thirdly, when cleaning and maintaining, we should pay attention not to change the structure of lamps and lanterns, nor to change the parts of lamps and lanterns casually. After cleaning and maintenance, lamps and lanterns should be installed as they are, and lamps and lanterns parts should not be omitted or misplaced.

Finally, lamps should be kept in use to prolong their service life. Specifically, we should pay attention to the following points: indoor lamps should be wiped with dry cloth frequently, and attention should be paid to preventing moisture from invading, so as to avoid corrosion damage or leakage short circuit after a long time; The lamps installed in the bathroom and bathroom must be fitted with moisture-proof lampshades, otherwise the service life will be greatly reduced; The lamps installed in the kitchen should pay special attention to prevent lampblack, because the accumulation of oil dirt will affect the lighting of lamps; Light-colored lampshades have good light transmittance, but they are easy to stick to dust, so they should be cleaned frequently to avoid affecting light transmittance; If the lamp is nonmetallic, it can be wiped with a damp cloth to avoid dust accumulation and hinder the lighting effect.

After the lamps are used for a period of time, a thick layer of ash will be deposited on them, which will affect our eyesight, so it is inevitable to clean them regularly. In the process of cleaning, be careful not to change the structure of lamps and lanterns, and don't change the parts of lamps and lanterns casually. After cleaning and maintenance, lamps shall be installed as they are, and lamps and components shall not be omitted or misplaced.

General lamps and lanterns should be wiped with dry cloth, and attention should be paid to prevent moisture from invading. If the lamp is nonmetallic, it can be wiped with a damp cloth to avoid dust accumulation and hinder the lighting effect.

Frequent switching is the most harmful to the lamp. Don't switch the lamps frequently when using, because the current passing through the filament at the moment of frequent start-up is greater than the current during normal operation, which makes the temperature of the filament rise sharply and accelerates sublimation, thus greatly reducing its service life, so try to reduce the switch of the lamps as much as possible.