Manual steps for making folding pages with paper boxes

The manual steps of making water tanks with cartons are as follows:

1. First, prepare a piece of cardboard with a length of 9 * 35cm, with two sides folded by about 8cm, and prepare two pieces of isosceles trapezoid cardboard with a waist length of 8cm, a height of 7cm, an upper bottom of 25cm and a lower bottom of 19cm. Glue them on both sides of the bottom plate, then fold the folded bottom plate on both sides and fix it with hot melt adhesive, and the tank cabin is completed.

2. Prepare 8 circles with a diameter of 4 cm, and wrap a circle of cardboard strips on them, the width of which is slightly larger than the thickness of the circular cardboard, so that the three-dimensional effect is stronger. There are eight wheels at the bottom of each side of the tank, four on the first floor and four on the second floor, which are cross-fixed. The two ends above the tank are slightly larger wheels and slightly smaller wheels respectively.

3. Then, prepare a 3.5 cm wide cardboard, peel off one side of the cardboard, and then wind it around the fixed wheel. This is the track of the tank. Make another 13 * 22cm cardboard box with a height of 2cm, and fix the barrel of the tank with bamboo sticks.

4. Next, wrap a circle of cardboard with a width of 1cm at the top of the disposable chopsticks, then wrap a circle of cardboard with a width of 5cm downwards, then wrap two circles of cardboard with a width of 5cm, and then wrap three circles and four circles, each circle of cardboard with a width of 5cm, and increase one circle in turn.

5. Fix the barrel, and then stick it firmly on the bracket with hot melt adhesive. Then there are all kinds of trinkets to decorate. Stick a piece of 3*22 cm cardboard on both sides of the tank, and tilt it slightly downward when sticking.

6. Insert the top hatch into the fuel tank and install two exhaust pipe protection devices behind the fuel tank.

Such a very domineering tiger tank is ready.