How to deal with the rebound of range hood switch

The rebound of the range hood switch means that when the switch is manually pressed or released, the switch will automatically rebound to its original position and will not stay in the pressed or released state. This phenomenon is usually caused by the loss of elasticity or failure of the internal spring of the switch. The treatment method is as follows:

1. Check whether the internal spring of the switch is loose or damaged. If so, replace the spring.

2. Clean the inside of the switch to remove dirt and dust, so as not to affect the elasticity of the spring.

3. Replace the damaged switch. If the spring has completely lost its elasticity, it needs to be replaced with a new switch.

4. Adjust the switch components. If the switch is not completely broken, but has a deviation, the components of the switch can be adjusted appropriately to solve the problem.

In short, the rebound of the range hood switch is unstable and prone to failure, so it must be kept clean and maintained in daily use. If you encounter serious problems, it is recommended to seek professional maintenance services.