Non-punching installation method of projector

Projectors are very practical educational and commercial tools. When using a projector to display presentations, movies and pictures, it is usually necessary to install them on the wall or ceiling so that the audience can watch them conveniently. The traditional projector installation method is punching holes, which will cause unnecessary damage and destruction. In order to avoid this kind of damage, some projector installation methods are simple and effective without punching holes.

1. Use the projector bracket.

Installing a projector bracket is one of the most popular methods. The projector bracket can be fixed on the wall or ceiling without any holes. The bracket is usually made of metal or plastic and can be adjusted and rotated according to your needs.

The specific operation steps are as follows:

Step 1: Determine the position of the bracket, and then drill two holes in the corresponding position with an electric drill.

Step 2: Fix the bracket on the wall or ceiling and make sure it is firmly fixed there.

Step 3: Install the projector on the bracket to ensure that it is firmly connected with the bracket.

Using the projector bracket

The projector bracket is another effective way to install the projector without punching holes. This method is most suitable for places that need to set up projectors in any position, such as restaurants or conference rooms. Usually, the projector stand can be placed on a table, cabinet or floor.

The specific operation steps are as follows:

Step 1: Determine the position of the projector, and then place the projector bracket on the surface where the projector needs to be placed.

Step 2: Install the projector on the rack and make sure it is firmly connected with the rack.

Using suction cup base

The sucker base is another way to install the projector without punching holes. This method is most suitable for situations where projectors need to be used in different rooms or places. The sucker base can be attached to any smooth surface to ensure the stability of the projector.

The specific operation steps are as follows:

Step 1: Determine the position of the projector and attach the suction cup base to the surface.

Step 2: Install the projector on the suction cup base to ensure that it is firmly connected with the base.

4. The messenger wire hoisting

Hanging wire is another way to install the projector without punching holes. This method is suitable for occasions where projectors need to be displayed, such as exhibitions or other exhibition activities. Hanging wires with a suitable plug can make the wires hang vertically, thus connecting the projector to the wall or ceiling.

The specific operation steps are as follows:

Step 1: Nail the safety earth door near the location to be installed, and then connect the rope to the bottom of the hook.

Step 2: Slide the rope onto the hook, and then adjust the length of the rope as needed.

Step 3: Install the projector on the rope to ensure that it is firmly connected with the rope.

The above is the introduction of the installation method of projector without perforation. Each installation method has its own advantages and disadvantages, so choose the installation method that suits you. Generally speaking, the purpose of installing a projector is to make it convenient for the audience to watch, so choose the best installation method suitable for the use scene and needs.