How to install running water lamp in pentium x40

The wiring diagram for installing running water lamp is shown in the following figure:

Moreover, the speed of running water polo mainly depends on the capacity of capacitor Cl-C3, and it is generally better to take 500- 1000uF. The relay can be selected at will, as long as the contact capacity of the load can be used.

As for the pull-in voltage, the difference of working current can be solved by changing the power supply voltage. This drawing adopts JRX-3 relay, which has six groups of contacts, one group of contacts is used for the circuit, and the other five groups of contacts are all connected in parallel, greatly increasing the load capacity.

Automotive exterior lighting principle

Check the air pressure of all tires under cooling condition at least once a month, including spare tires, and do not exceed the reasonable speed required by driving conditions and legal restrictions. When you encounter obstacles such as stones and potholes ahead, please pass slowly or avoid them. Regular wheel alignment and balance are very important to ensure your driving safety and obtain the ideal mileage inquiry reserve price | Check the number of parameters and extend it to achieve the effect of uniform wear.

The service life of tires, when the vehicle travels about 8000km to 10000km, it is necessary to adjust the tire position to prevent the sun, oil, acid and hydrocarbons from eroding the tires, and to develop good driving habits, such as avoiding emergency braking and slamming the steering wheel.