Installation steps of sliding door track

Now people decorate all kinds of building materials, regardless of decoration style or characteristics. Sliding door is one of them. There is another saying about dragging the door. In fact, the sliding door still needs a supporting frame, which is the sliding door rail. So what are the installation steps and correct steps of the sliding door guide rail? Now follow us to find out.

First, the sliding door rail installation steps

1, sliding door rail installation steps, ensure that the track box above the sliding door is 12cm in size and 9cm in width. Just like curtains, install the track in the track box so that the sliding door can be hung on the track. If the height is less than 1.95 meters, it gives people a feeling of depression. If you consider making a sliding door, the height should be at least 207cm.

2. The most suitable size is about 80cm×200cm. With this structure, the door is more stable and beautiful after installation. So the width and height of the sliding door should be close to the size of gold.

3, sliding door guide rail installation steps, pay attention to the use of sliding doors from the ground to the top. Because the swing amplitude is too large when pushing and pulling, the sliding door is easy to deform after a long time, and the deformed back door cannot be opened and cannot be used normally.

4. When installing the sliding door track, remember to fix the track. Hang three points at the two ends and the midpoint of the upper rail with a gravity cone, draw a 3.3-point fixed surface on the ground, and draw with an oil painting. Install the upper rail, and then put the hanging hammer on the ground at the center of the upper rail. Put vertical lines at both ends of the track, and fix the lower track at these three points so that the upper and lower tracks are parallel, so that the sliding door can be used normally.

Second, how to install the sliding door track

1. The size of the track box at the upper part of the sliding door should be 12 cm high and 9 cm wide. Like the curtain box, the track box is equipped with a track, and the sliding door can be hung on the track. When the height of the door is lower than 1.95m, people feel depressed. Therefore, when making sliding doors, the height should be at least 195+ 12=207 cm. The size of a normal door is about 80 cm× 200 cm. Under this structure, the door is relatively stable and beautiful. Therefore, the width-height ratio of the sliding door should be similar to the size. Use the sliding door carefully from the ground to the top (open the hanging rail box). Because the swing amplitude is too large when pushing and pulling, the sliding door is easy to deform after a long time, and the deformed back door cannot be opened, which means that it cannot be maintained and used.

2. Install the sliding door track: fix the upper track, use gravity cones (hanging wire hammers) to hang three points at both ends and midpoint of the upper track, draw 3.3 points on the ground to fix the surface, install the upper track, and then put a hanging hammer at the center of the upper track to the ground. Vertical lines should be placed at both ends of the cross bar, and the lower cross bar should be fixed at these three points, so as to ensure that the upper and lower cross bars are completely parallel, and the push and pull of the sliding door will be in a better state.

In the above article, I told you the installation steps and how to install the sliding door guide rail. I hope these can help you, too. Need to install sliding door guide rail. You must know the correct installation steps. I hope these can help you.