CAD doorway how to draw

1, first open the CAXA software, the new "BLANK" blank drawings;

2, adjust the layer for the thick solid line layer, use the straight line command, select the drawing of a point to start drawing the door frame, the first up to draw a straight line 80mm;

3, and then to the right to draw a 40mm long straight line, in accordance with the size of the drawing clockwise to draw a closed L-shaped

4, the use of isometric line function, to the left of the 80-long straight line as a benchmark, a distance of 450mm, to make an axis of symmetry;

5, the use of mirror commands, using the axis of symmetry has just been done to do a mirror operation on the door frame so that the door frame is done;

6, the next drawing of the door, the use of the Rectangle command to the top right corner of the door frame vertex as a reference, draw a rectangle to the upper right, enter @40,820 relative coordinates as the rectangle of the top right corner of the apex of the coordinates, do not add the @ is the absolute coordinates, there will be an error;

7, switch the layer for the thin solid line layer, used to draw the open door trajectory, in accordance with the figure in the order of clicking the door to the center of the circle of the lower-left corner of the door, the door frame left corner and the door's left corner of the starting and end point, drawing arc, so that the single door is drawn;

8, double door drawing can borrow a single door, copy a single door out, use the mirror command, in addition to the right door frame part as a mirror object, to the right door frame of a side of the axis of symmetry, to do the mirror operation;

9, and then the middle of the redundant door frame to delete, the double door is drawn;

10, and finally the single door, double door together, if necessary, they can be made into two blocks, easy to call when drawing;