Bathroom heater circuit installation method step by step examples

In the cold winter, bathing in the bathroom, we may be too low because of the ambient temperature and feel distressed, so many businesses for this aspect of the concerns and problems introduced similar to the following out of the bath heater, but the bath heater may not be able to achieve satisfactory results in the latter part of the specific but also combined with the installation of the operation of the recommended skills and regular maintenance methods to start, can play a basic lighting and further heating and warming purposes, today we recommend that is about the installation of circuit advice and methods and steps. Can play a basic lighting and further heating and warming purposes, today recommended for you is about the installation of the bathroom heater circuit recommendations and methods of step by step, from which you can start to know, the bathroom heater circuit is divided into the installation of the bathroom heater switch as well as some spare parts of the wiring, you should be a comprehensive study.

a, (1) bath bar switch installation of the power supply line generally have three lines:

1, ground, yellow and green one, in the socket above the bathroom, connected to the shell of the bath bar.

2, the zero wire, most cases are blue or black, in the socket on the lower left side of the bathroom, connected to the five lamps screw catch.

3, the fire wire, most of the cases is red, in the socket located in the lower right, connected to the three switches on a terminal.

(2)Switch purpose of the bath bar switch installation

Three switches, the one of the pipe lighting, the other terminal connected to the center terminal of the lighting head; two switches of the pipe heating, each of the other terminal connected to the center terminal of the two heating lamp head. Bath heater terminals marked with N to 0, the other four have two heating lamps, a ventilation, a lighting, these four to the switch control button, in addition to a fire wire to the switch, need to pay attention to is the color of the line to be clear.

(3) bath switch installation method

First of all, choose a good location, choose a location that can be easily used for installation, the switch is usually installed on the ground at a height of 135 cm. Bathroom is more of a water space, the bath bar switch is best installed at this height as well. 135 cm height is safe and convenient for users to operate. The bath switch is generally speaking, there are three switches, two are to control the heating, etc., and one is to control the lighting.

In fact, just from the outside of the line is not to ensure that the wiring is correct, get it wrong will also burn the line. It needs to be turned on, and it is important to note here that some brands of bath bombs require the light to be removed in order to be disassembled. Bath heater switch installation location is a headache, installed in the bathroom for fear of switch leakage accidents, and bath is a high-power appliances have several functions, switch wiring is not good can easily lead to leakage or bath heater burned; installed outdoors in the bath is not very convenient switch bath.

Second, the bath bar switch wiring steps illustrated:

The bath bar wiring error, then one open is the lighting module, heating module, exhaust module together.

As shown in the figure below: there are three power supply lines of the bath bar switch wiring:

1. Ground, the yellow and green one, above the socket, connected to the shell of the bath bar.

2. The zero wire, blue or black, is on the lower left side of the socket and is connected to the screw-in catch of the five lamps.

3. The fire wire, red, is on the right side under the socket and is connected to one of the three switches.

Through the above example, we can learn to decide the late use of the effect of the bath is more factors, which plays a key role is the installation of the bath circuit, including some of the wiring steps and switches in the pre-installation of the place should pay attention to, in addition to this, we should be combined with the recommendations of professionals to determine the appropriate size of the bath, combined with the bathroom and the bathroom itself, and so on. Dimensions of the structure of the area and so on to start, in order to achieve satisfactory results, there is a need for friends may wish to refer to the understanding of the above, combined with the specific circumstances, to come up with reasonable and reliable recommendations and programs.

Tubapu online free of charge for everyone to provide "each home decoration offer, 1-4 local decoration company, 3 sets of decoration design program", and decoration to avoid pit strategy! Click on this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiare&wb, and you can get it for free.