Traditional Culture Encyclopedia - Traditional stories - Five maintenance rules of hotel lamps extend the life of lamps.
Five maintenance rules of hotel lamps extend the life of lamps.
Pay attention to the following five rules when maintaining.
First, during cleaning and maintenance, care should be taken not to change the structure of lamps and lanterns, nor to replace the parts of lamps and lanterns. After cleaning and maintenance, install the lamps as they are, and don't miss or misplace the lamp parts.
Second, buy back the lamps and lanterns, don't be busy installing them, carefully check the installation instructions of lamps and lanterns, and then install and use the lamps and lanterns according to the instructions in the instructions, otherwise danger may occur;
Third, when using lamps, try not to use switches frequently. Because the lamps are frequently started, the current passing through the filament is greater than that during normal operation, so the temperature of the filament rises sharply and the sublimation is accelerated, which will greatly reduce its service life, so it is necessary to minimize the number of switches of the lamps.
Fourthly, replace the aging lamp according to the light source parameters provided by the mark. If the lights at both ends of the power distribution are red, the bulbs are black or shadowy, and the bulbs are not bright, they should be replaced in time to prevent unsafe phenomena such as burning out the ballast;
Fifthly, lamps should be maintained to increase their service life. Be sure to wipe with a dry cloth, pay attention to prevent moisture from invading, so as to avoid long-term rust or short circuit; Light bulbs installed in bathrooms and bathrooms must be fitted with moisture-proof lampshades, otherwise the service life will be greatly shortened; The lamps installed in the kitchen should pay special attention to prevent lampblack, because the accumulation of oil pollution will affect the lighting of lamps; The light color of the lampshade is better than that of the lampshade, but it is easy to stick, so try to wipe it so as not to affect the light penetration; If the lamps are non-metallic, they can be wiped with a wet cloth to avoid dust accumulation and hinder the lighting effect;
- Related articles
- What are the features of the new Chinese TV stand? What is the size of the size?
- What are the main services provided by the Internet?
- Solid wood tables and chairs manufacturers recommended
- Inventory of the five major net red snacks, all eaten counted you great!
- How to modulate colors? Which colors can be made brown?
- How to write a composition for Jianli county specialty
- How to correct hunchback video
- How do you wipe the concrete floor?
- Flower arrangement form-flower basket
- What factors should be considered in logo design?