The glaze on the toilet appears to wear and tear, how should I remedy it?

1, it is best to use the ceramic powder specifically to wipe the ceramic, if not, use fine sand the finer the better plus toothpaste sand a bit with a little water to deal with.

2, with anti-glaze technology may be effective: buy transparent resin and resin color paste, according to the tone of your ceramic ware, in the polished and decontaminated surface, carefully matched, carefully painted, get it right will be close to the original.?

3, buy cleaners, ceramic special, spray on it, and then wipe, recommended to use wipe wipe Klin, is a sponge wipe, very good, the price is not expensive, good decontamination ability, does not hurt the ceramic these surfaces.

Ceramic glaze consists of ceramic layer and glaze layer, glaze layer by nanomaterials and glaze paste mixed with the surface of the ceramic layer covered. Due to the addition of nanomaterials in the glaze, ceramic products in the application, can repel odors, release negative ions, increase energy, enhance physical fitness, the user will play a certain role in health care.

Ceramic glaze cleaning methods and care methods: in the cleaning or damage to the application of toothpaste wipe.

Extended information

Toilet glaze good and bad differentiation methods:

1, through the feel to identify

Buy a toilet can be used to gently touch the surface of the toilet. Toilet surface smooth, and glaze and billet feel more delicate, the toilet glaze quality is better. If the toilet glaze and billet are relatively rough, and the color is dull, and there will be small holes in the light irradiation, it shows that the quality of the toilet is not very good, belonging to the low-grade toilet, we should be careful to buy.

Toilet glaze is too rough, it is easy to hide dirt, cleanup is more trouble, after a long time of use there will be some stubborn dirt cleaning. Therefore, we should try to choose the glaze and body are relatively smooth toilet.

2, through the weight to judge

Generally speaking, the quality of the toilet in the firing temperature is high, to achieve the situation of all porcelain, weighing in the hand feel heavy. The lower quality of the toilet in the firing temperature is lower, firing time is also short, it can not reach the situation of full ceramization, naturally, in the weight is also lighter.

We have to compare the quality of the toilet in the same size of the toilet when buying, if the toilet size is not the same, the quality of the comparison of the light weight is not referential.

3, the toilet stain glaze need to pay attention to

We are in the selection of the toilet, pay special attention to the stain whether there is a glaze.

You can put your hand into the toilet mouth, touch the interior to see if it is smooth. If the surface is rough, it means that there is no glaze inside, so the toilet is easy to leak. And especially easy to hang dirt, after a long time, not only not easy to clean, but also very easy to occur the phenomenon of toilet clogging. Therefore, when you buy a toilet, the glaze at the mouth of the toilet is also very important.

Baidu Encyclopedia - Ceramic Glaze