Dismantling method of old toilet base screw

The old toilet seat screw is an important part to fix the toilet. Once a problem occurs and needs to be removed, special steps and tools are needed. Here's how to remove the old toilet seat screw:

1. Preparation tools: It takes a wrench, a wrench extension rod, a flat pliers and a rubber hammer to remove the old toilet seat screws.

2. Turn off the water source: Before dismantling, you need to turn off the water source, disconnect the water pipe, and then dump the water in the toilet.

3. Remove the cover plates on both sides of the base: Remove the cover plates on both sides of the base and unscrew the screws in turn with a wrench.

4. Remove the extension rod screw: connect the wrench with the extension rod, fix the screw with flat pliers, then turn the wrench and unscrew the screw counterclockwise.

5. Tap with a rubber hammer: If the screw cannot be loosened, tap the screw with a rubber hammer to loosen it.

6. Dismantle the base: After removing all the screws, gently shake the toilet by hand and remove the base from the ground.

It is worth noting that you should be very careful when removing the old toilet seat screws, so as not to damage the toilet or accessories. When removing, you should operate on a stable ground, and don't move the toilet at will to avoid scratching the ground. If you don't understand something, you can consult a professional or find a maintenance master to repair it.