What are the common hardware specifications What are the common hardware specifications Image

1, the full name of the eccentric head is called eccentric connection mother, the role is to connect the fastening of the two boards, so that the distance between them is closer. Generally available in zinc alloy and aluminum alloy, the most common specifications for the furniture industry is φ15, thinner furniture using φ10, φ12 specifications, if it is a thicker plate, there are higher requirements for load-bearing, you can use φ35, φ25 specifications.

2, hinges are also often referred to as hinges, usually by the page, bearing, axis, plug this several components. Types of T-type, H-type, core type and so on. Common specifications: 2 inch * 1.5 inch; 2.5 inch * 1.7 inch; 3 inch * 2 inch; 4 inch * 3 inch; 5 inch * 3-3.5 inch; 6 inch * 3.5-4 and so on.

3, cabinet pulls in many styles, specifications are generally 6 cm, 9 cm, 12 cm and so on, according to the consumer's preference to match. For example, 50 cm below the drawer or cabinet door, choose a single hole or 6 cm handles; in the 50-80 cm between the drawer or cabinet door, then choose 9 cm handles; in the 60-100 cm between the drawer or cabinet door, then choose 12 cm handles.

4, screws have metric and imperial points, M6 * 30 refers to the screw thread diameter of 6 mm, 30 refers to the bolt screw part of the length of 30 mm. There are also M5, M8, M10 and so on. Modern furniture commonly used screws with 6 mm internal or external hexagonal screws.