How to choose to install shower head and how to maintain shower head.

Shower shower is essential for the bathroom. Shower products on the market have a wide range of brands and uneven quality. Therefore, we should be careful when purchasing shower heads. Let's take a look at the following small series about the selection and installation method of shower and how to maintain the shower!

How to choose and install a shower?

First, how to choose a shower?

1, choose shower products with better water-saving performance, and try to choose small showers. Because large showers consume a lot of water, we can look at the test report of shower products and try to choose showers with filters, so as to filter out impurities in water quality.

2. Pay attention to the surface of the shower when purchasing, and try to choose a shiny surface. In the shower structure, the connecting nut should be made of copper, because the shower is a product that often comes into contact with water, and the copper nut is not easy to rust.

3. Try to buy big brands, which have better quality and longer service life. It won't be long before the cheap shower head has scratches on its surface, which not only affects its appearance, but also looks tasteless.

Second, the installation method of shower shower

1. Although the shower is a small product, it has many parts. Be sure to read the instructions carefully when installing, then mark the installation position of the shower according to the height of the family members, and then punch holes in the wall. After punching, screw the round bottom cover into the attachment at the wall hole and tighten it. Then fix the shower on the wall and tighten it. Finally, put on the shower hose and put on the hand-held shower.

How to maintain the shower?

1, in order to make the shower have a long service life, it must be maintained in daily life. The shower head has been used for a long time, and it is inevitable that there will be water stains inside. We can soak in white vinegar, put the shower head in mixed white vinegar water, soak for two hours, and then rinse the shower head to make it look brand-new.

2. Another way to clean the shower head is to disassemble the shower head, but this is determined according to the material of the shower head. If it is a plastic shower, it can be unscrewed directly by hand. After unscrewing, wash the filter screen and water outlet with water, and then you can install it. If it is a metal shower, you need to use related tools to disassemble it. Cleaning method is the same as plastic shower head. If the above methods are not clean, you can use the first stupid soaking method.

When using the shower head, try not to let it fall to the ground. Shower heads are easy to be damaged, especially plastic shower heads. Once it falls to the ground, it is easy to be damaged.