How does a faucet water heater work? How to install faucet water heater

The faucet is a familiar hardware in our daily life, but in the case of cold winter, many people want to use hot water through the faucet, this time many friends will come into contact with the faucet water heater, the faucet water heater should be installed correctly before it is available for us to use. So how is the faucet water heater installed? How to use the faucet water heater in life?

How to use the faucet water heater

1, faucet water heater to use the first step is to turn on the power, and then the faucet water heater indicator will be lit up, prompting us to faucet water heater has been working properly, to be to the faucet water heater indicator light off when the water heater that heats the water temperature has reached a constant value has been cut off the power supply, so the use of the water heater will be a bright light during the process of the indicator light is bright. The process of the indicator will appear to be bright when the situation is off.

2, the faucet water heater will first be automatically filled with water, and then the device will be electrically heated, until the water is preheated and heated to be able to use. If you encounter a drop in water pressure or sudden stoppage of water when in use, please turn off the power in time to avoid dry burning.

3, electric water heaters are equipped with faucets with reflux devices, usually with "blue" for cold water, "red" for hot water. Use, turn on the "red," the faucet, there is hot water out of this time, such as water temperature is too high, you can turn on the "blue" faucet at the same time, and adjust the size of the water output, you can get the right temperature of hot water.

Faucet water heater how to install

1. In the case of more than one hot water outlet needs hot water, in the hot water outlet end of the water heater divided into a few (there are a few hot water outlets divided into a few) Tee, if it is a newly renovated house, you can ask the plumbing and electrical installers in the wall pre-buried concealed pipe, if it is an old house, the requirements are not high, installing the open pipe is also OK. After installing the tee, you can divert the hot water to the place where you want to use hot water, including the kitchen, washbasin and other places that need hot water!

2. As for the need to control the start of the water heater with hot and cold water faucets, as long as you electrify (or battery) gas, in any hot water outlet, open the faucet, the gas water heater will automatically start!

3. As for the installation of the mixing valve, and the water heater is not contradictory, the mixing valve has two interfaces, the left side of the hot water, the right side of the cold water on it (in fact, there is no left and right, just so accustomed to)

4. After installing the mixing valve, the mixing valve is biased to the hot water end (the left side) that you can start the water heater! If the water is hot, then turn it to the right a little bit, it's fine!

How to install a faucet water heater and how to use a faucet water heater, in the above has been a detailed answer for you, I hope you can understand, the correct installation and use of faucet water heaters.