How to adjust the night fishing drift?

1. Roughly find the bottom: In order to improve the accuracy of drift adjustment, firstly, don't install the dividing line, and find the light-emitting lamp to be flush with the water surface to ensure that it falls to the bottom. Then, pull the float down about 40 cm, which is more than the length of the secondary line, install the secondary line, and start drift adjustment. The advantage of this is that once the eye position adjustment is determined, the eye position adjustment will not change, and it may change with the increase of water depth. ?

2. Drift adjustment: Trim the lead patiently until the luminous rods are out of the water, so that the reflection interval is about 1.5 luminous rods. At this time, the number of eyes drifting tail is not important. ? ?

3. Changes of the dull fish eye: In general, when fishing with bait, the distance between the luminous part exposed from the water surface and the reflection of the water surface is about half of the length of the luminous rod, so it can be determined that the hook is hooked to the bottom, the short line is straight, and the fishing group is more sensitive. As long as the luminous reflection is turned off or opened, the luminous stick above 1.5 will be lifted and the vision will be obvious.