How to clean the seal on your hand with what?

1. First pick up the seal with the printing face up, and then spray it on the printing face with a special seal cleaner solution, which can be bought on Taobao.

2. Then, after the dirt on the seal becomes soft, brush the seal with a small brush.

3. If you encounter oil dirt that is difficult to clean in the concave part of the printing surface, you can pick it out with a needle for cleaning, or use a cotton swab to remove the dirt on the dead corner, then scrub it clean, and remember to put the seal in a ventilated place to dry.

4. If there is no detergent, you can also use a cotton swab dipped in makeup remover to clean it.

5. If it is a seal with more details, there will still be ink residue in the gap after the cotton swab is cleaned. At this time, it is necessary to carry out the follow-up treatment: cut a cotton towel with the right size and wet it with makeup remover to cover the surface of the seal.

6. After a period of time, continue to wipe with a cotton swab, then dry with a clean cotton towel and clean the seal.

7. If it is a metal seal, you can use a toothbrush with bristles. If it is bristles, brush it lightly with a wire brush for a few times, and then rinse it with water. Note: Be careful when carving bronze seal by hand with wire brush, and don't use force, because the strokes of the seal are easy to be brushed off.