How to paste the wall when laminate flooring decoration

When laminate flooring renovation, wall pasting is a very important part, it can affect the overall effect of the whole home. Here are some steps for wall pasting:

1. Clean the wall: before you start wallpapering, make sure the wall is clean. Any grease, dust, stains, etc. on the walls should be removed thoroughly.

2. Determine the size of the wallpaper: first of all, measure the height and width of the wall, and then cut the wallpaper according to the measurements to ensure that they match the size of the wall.

3. Apply wallpaper adhesive: Use wallpaper adhesive to apply on the wall, remember to apply it well and distribute it evenly.

4. Fine-tune the wallpaper: Gently "slide" the cut wallpaper onto the wall and adjust the position of the wallpaper to make sure it fits perfectly.

5. Smooth the surface: Gently flatten the wallpaper with your fingers or a smoother to remove as many air bubbles as possible.

6. Make an overall match: Repeat the above steps until the entire wall is covered.

7. Finally, check and adjust: make sure that the wallpaper surface is flat and ripple-free, that there are no wrinkles at the corners, and that the seams are perfectly aligned.

If you are a DIY type of decoration, you can go through the above steps to paste the wallpaper, if you are not DIY type on behalf of you need to find a professional team to complete your work.