Street light remodeling project need to use what equipment?

Street light renovation projects need to use equipment: street light power saving equipment, remote anti-theft equipment, time-controlled regulation of street lights. Lamp network" through the Internet to achieve remote monitoring, energy-saving management of each lamp, to achieve a single lamp "four remote" monitoring function, to achieve a single lamp "control camp" integration, from the management and energy-saving two perspectives on the user lighting system for the The company's products are designed to meet the needs of the market, and are designed to meet the needs of the industry.

The first kind of street lamp transformation is the replacement of the existing street lamp head, that is, the traditional high pressure sodium lamp or metal halide lamp and other light sources into the new led light source.

Take the traditional 250w high-pressure sodium lamps (existing street lamps to high-pressure sodium lamps), its own power consumption of 250w, plus the power consumption of the organizer and its own wear and tear in more than 300w, after several years of use (high-pressure sodium lamps life of 3,000 hours), the system power consumption will be up to 400w, and the same brightness with a 120w led street lamps can be used to replace it, or In the same brightness led street lamps can save half of the electricity, compared to the high-pressure sodium lamps of electricity is a great waste of traditional street lamps transformation should not be delayed, and now a lot of areas of the domestic street lamps are mostly used in this 250w high-pressure sodium lamps.

Three main ways to transform street lights

The traditional street lamps with led street lamps for the transformation (only the head part of the lamp into a led light source, the other part of the same), the existing 250w high pressure sodium lamps with a 120w led light source can be replaced, and now the number of leds in the lumens of the led light source per w in the 80 to 90, a good point of the led lamp beads per w can reach 90 to 100 lumens, and now basically can replace the led light source. 100 lumens, now basically can replace the 250w high pressure sodium lamp, with the existing technology next year 120w led can completely replace the 250w high pressure sodium lamp.

But because most of the existing street lamps for sodium metal halide lamps, etc., direct replacement will cause great waste.

The second street lamp transformation is based on the existing street lamp upgrade, that is, in the existing street lamps on the installation of single-lamp controller, is a new product of the Internet of Things technology, the new single-lamp controller can make the street lamp control intelligent and 0-10v dimming power reduction; both to enhance the overall control of the city's street lamps to achieve intelligent, but also able to achieve energy saving and emission reduction purposes.

The third kind of street light transformation is to change the utility street light into solar street light, because the solar street light is a kind of street light using solar energy as an energy source, it is not affected by conventional electricity, and do not have to dig a ditch to bury the line, do not consume conventional electricity. It can be used wherever there is sunlight. It has the advantages of safety without hidden danger, energy saving without consumption, and green environmental protection.

In fact, there are many other ways to transform the street light, such as the addition of a power saver, etc., but because the actual use does not bring good transformation effect, so it is not recommended.