Design process of acquired floating building (with bill of materials)

v 1.0.204

Type: flight shooting

Size: 1860MB

Rating: 9.9

Platform:

Tags: survival shooting, eating chicken, gunfight

Do you want to have your own "floating manor" in it after tomorrow? It's exciting to think about it. Today, Bian Xiao will share with you the design process of a floating building named The Day After Tomorrow. Let's have a look.

This is a floating house with a building area of 6×6 and a height of 5 floors. The structural score of the building needs to be close to 290 points. If the structural score is not enough, you can make appropriate changes in the main part of the house and keep the floating part.

Art of binding and design

The most important thing in building floating houses is the design of floating support points. Here, Bian Xiao will share a floating tip with you.

Floating part

First of all, the foundation needs to be built with low walls and floors as shown in the blueprint. In order to save structural points, floors can be reduced in the middle of the ground floor.

The next step is the focus of floating design.

first step

Put the stairs first, and then put a wall on the left side of the stairs.

Second step

Stick a 3-type inclined wall on the wall, and then recycle the next wall, so as to form a floating effect.

Third step

Relying on the inclined wall, four fan-shaped floors are used to form a circle.

According to the above steps, the key part of floating is completed, and the main building is built on it, which will make the whole building look like floating on the stairs.

Main body part

Second floor of the building

On the basis of the floating part, a supporting platform is built with low walls and fan-shaped floors.

It should be noted here that before installing the fan-shaped floor, two inclined walls need to be placed, and then one of them can be recycled.

Building three floors

On the third floor, use the floor to build a bottom floor with an area of 4×4.

After pasting a low wall around the bottom floor, continue to use the floor to expand the area of the main body on the third floor above the low wall.

As shown in the above picture, there is a pavilion on the upper right, where a multi-level roof design is adopted, and in front of the pavilion is a spacious open-air balcony.

The other side of the exhibition hall is mainly a semi-closed living room. All windows use B windows, and some walls can use low walls, so that the whole space will look very open.

Building four floors

On the fourth floor, there is a 3×2 bedroom above the living room, and there is a small balcony surrounded by a fence at the door of the bedroom.

Finally, let's cap it. The bedroom and terrace roofs are both built with type 2 roofs. After the roof was completed, a floating manor was officially completed.

Materials used in the building: