How to maintain aluminum alloy doors and windows?

Today I share with you several different materials doors and windows of the use and maintenance tips Oh! Because, home windows and doors should be our most frequent use, but also the most vulnerable part of the many furniture. However, if homeowners can be clever in the usual windows and doors and the use and maintenance, it can be very good to extend the use of windows and doors.

Aluminum windows and doors

1. In the aluminum alloy doors and windows for cleaning, people try not to step on the aluminum frame, and do not pull the frame as a support for people.

2. Aluminum alloy doors and windows in ordinary use, the action should be light, push and pull naturally; if you find that there are difficulties must not be hard to pull hard to push, should be ruled out the existence of faults. Accumulation of dust, deformation is the main reason why aluminum alloy doors and windows appear to push and pull the main reason for the difficulty of the situation, to keep the door frame clean, especially to keep the door and window sliding groove position clean. You can use a vacuum cleaner to suck away a lot of dust in the groove and inside the door seal.

3. Aluminum doors and windows can choose to use a soft cloth with water or neutral detergent, do not use ordinary soap and laundry detergent, not to mention the use of decontamination powder, toilet bowl cleaner and other strong acid and alkali detergent.

4. After the rainy days, you should wipe dry the wet glass and door and window frames in a timely manner, pay special attention to wipe dry the chute water. Slip groove for a long time, friction increases, can add a little oil or a layer of fire wax oil.

5. The connection parts of aluminum alloy frame should be checked frequently, tighten the bolts in time and replace the damaged parts. Positioning pins, wind braces, floor springs and other fragile parts of aluminum alloy doors and windows should be checked from time to time, regularly add lubricant to keep clean and flexible.

6. Sealing furring and glass seal is to ensure that the key structure of the door and window sealing and heat preservation, such as shedding to be timely repair, replacement.

7. Frequently check the aluminum alloy frame wall combination, if loose for a long time, it is very easy to make the overall deformation of the frame, so that the doors and windows can not be closed, sealed. So the connection of the screws loose should be tightened immediately, such as screws foot loose, should be epoxy glue mix a small amount of cement sealing.

Wooden windows

1. When cleaning the glass, frame, door and window parts, you should use water or neutral detergent, wipe with a soft cloth, so as to ensure that the glass, frame and other parts are not scratched. Every three months should be window combination of grooves and slide parts to clean up, to prevent dust, sand and gravel, etc. on the normal use of hardware caused by adverse effects, you can use soft hair or vacuum cleaner to clean up.

2. Every three months should be the door and window frame corner parts of the hardware fasteners for inspection, found that the screws are missing or loose should be tightened or replaced.

3. Every six months you can use lubricant to lubricate the hardware rotation, sliding and locking points and other parts of the lubricant, drip lubricant and then repeatedly open and close 3-5 times to ensure that the lubricant is thorough, which can increase the flexibility of the hardware rotating mechanism and service life.

4. Do not dismantle the doors, windows and accessories by yourself or privately change the structure of the doors and windows and compartmentalized format, if necessary, you can contact the door and window manufacturers or ask the professionals to solve the problem on site.

Plastic steel doors and windows

Plastic steel doors and windows with the same comprehensive performance and aluminum alloy doors and windows, the maintenance requirements and aluminum alloy doors and windows.

But plastic doors and windows acid and alkali resistance, available soap and water and other common detergents cleaning, but the surface of the plastic doors and windows are not abrasion-resistant, pay special attention not to scratch, do not stained with gasoline, banana water and other agents. Also prevent the boiling water and contact with high temperature deformation. In the use and cleaning process sliding doors and windows of the bottom frame, are not feet and hard objects such as knives, hammers and other blows.

In addition to the daily maintenance after the completion of the installation, I remind you is also necessary after the installation of the inspection, doors and windows after the installation of the general need to check the following five aspects:

1. Doors and windows frames and fans of the profile welds have no cracks.

2. Doors and windows fan there is no obvious deformation, warping, casement fan sagging.

3. Check whether the sealing strips, leather strips have contraction, deformation, there is a gap.

4. Hardware fittings have no rupture, damage, tightness.

5. Whether the drainage hole is smooth.