How to adjust the float is the most sensitive.

First of all, you should know the depth of water, and then use it according to the weight of the lead pendant and the buoyancy of the float. After the eye adjustment is determined, the higher the fishing eye, the duller the drift, and the lower the fishing eye, the more skillful it is.

The mesh number of a drift net is 1 1 mesh drift, and after the half water is adjusted to seven meshes, the bait is weighed, and two baits and half water are rubbed into one mesh (that is, the double baits are floated down to six meshes), and fishing is started after finding the bottom. At this time, if the fishing target is an eye, it means that it is in the most spiritual state (provided that the size and weight of the bait are basically the same as when weighing the bait), that is, the bottom bait touches the bottom and the upper bait floats.

If you need to be blunt, you can move the float towards the tip of the pole (lengthen the waterline), so that the number of fish eyes will increase. When the number of fish eyes is seven, the float is in an invalid and dull state, that is, the double bait touches the bottom (this is not necessarily depends on the length of the double hook distance). As the float moves upward (that is, the waterline becomes longer), the number of fish eyes will increase and the lead pendant will lie on the bottom. Floating will become more and more dull.

Let me put it this way! After adjustment, the higher the fisheye, the dimmer the float, and the lower the fisheye, the brighter the float!

Single hook drift adjustment: only use an empty hook when debugging, adjust it several times, first ignore the weight of a hook, then put on the hook set after adjustment, so that the drift tail is exposed from the water to adjust the fish eye when fishing. At this time, the bottom hook must be undercover, and the hook just touches the ground. This adjustment method is simple and practical.

Double bait drift adjustment: this is the easiest to understand. Of course, before drifting, you must first make sure that the bait you rub is basically the same, and then hang the double bait and half water for debugging. When entering the water, the float will slowly sink under the weight of the bait until the tail sinks completely. When debugging, just cut off the weight of lead slowly until the fish eye (one eye, two eyes or three eyes) you want is exposed at the tail, such as adjustment. However, we should be concerned about whether the baits we rub are all the same size, and during the launch, the baits will atomize some weight, and the double baits will leave the ground after several adjustments. In order to avoid this problem, you can catch two eyes if you adjust a purpose with double bait. Three eyes, even five eyes and six eyes can be caught. As long as you like, you can catch lead directly and become a traditional fisherman. As long as there is a drifting letter, bold and slow fishing is also possible. For fishermen, if they are not afraid of floating, they are afraid of floating.

Carbon leg soft tail drift has good stability in water, strong wind resistance, relatively true drift letter and good next signal, and is usually used for fishing in competitive competitions.

If you want to catch a good fish, you must adjust your drift. First of all, we must abandon the secular concept. The traditional fishing method was gradually forgotten by competitors and replaced by Taiwan Province fishing, also known as hanging fishing.