Skills of realizing intelligent control of lamps and lanterns

Want to realize intelligent control of lighting? Here's a trick, just connect the zero line and live wire of the plug to the zero line and live wire of the lamp respectively, then connect the lamp to the plug and plug it in. Select the plug with switch, and control the switch to easily turn on or off the light!

Can't bear pure resistive load.

If the electricity consumption in the dormitory is limited, this plug-in can't withstand pure resistive loads, such as hair dryer and rapid heating.

Can't use high power load.

The wires of the lighting circuit are relatively thin, and the rated current of the protection circuit breaker is relatively small, so the high-power load still cannot be used. Inadvertently used, the lighting circuit breaker will trip and the wires will burn, causing a fire.

Pay attention to dormitory management regulations

Even if the light switch has been turned off, if the dormitory management regulations are to cut off the lighting power at the same time, then this plug-in is still dead.

Pay attention to safety issues

Find out the above three questions, and you should be able to judge whether this method is suitable for you! But the most important thing is that you must not violate the dormitory electricity management regulations, otherwise any safety accident is a big responsibility!