Method for assemble folding mosquito net

There are two kinds of folding mosquito nets, one is Mongolian mosquito net and the other is court mosquito net. Here are two ways to assemble mosquito nets:

The first step of the installation method of the yurt mosquito net: take out the mosquito net and lay it flat on the ground, then connect the folding tent pole into two pieces, and insert the two pipes into the upper cloth cover of the mosquito net in turn.

Step 2: After the mosquito net is spread out, insert the heads of the two poles into the holes.

The first step of the installation method of the palace mosquito net: first, prepare tools such as air jet drill, 10 drill, No.8 drill, wrench, pliers, tape measure and coins before installation. Then check whether the accessories of the mosquito net are complete, such as bracket base, explosion-proof screws, wood screws, mosquito net hooks and so on.

Step 2: Locate the drilling hole, measure the height you need to install with a tape measure, and then mark the height you need to locate on the wall with a pencil.

Step 3: Install the drill bit of air impact drilling, and drill a hole 90 degrees vertically at the mark of the wall. The depth of the hole depends on the actual length of the explosion screw. After drilling, insert explosion-proof screws, then fix the mosquito net bracket base and tighten the screws. Then fix the mosquito net bracket base with wooden teeth screws.

Step 4: Finally, register mosquito nets in a certain order.