How to weave a toy with slub thread?

Preparation materials: bamboo joint (plastic pipe is not used to replace bamboo joint): 10, plastic plate: 2, rope: 2, wood blade Jr.: 1.

1, first prepare the 10 segment, and then put a human figure, as shown in the figure.

2. Take a rope and a plastic sheet, and then put the rope through the hole in the middle of the plastic sheet.

3. After the rope passes through the plastic sheet, put the yellow section on the left (the bamboo man's left foot) on the rope.

4. After putting on the yellow section, put on the red section in the middle (the body of the bamboo man).

5. After the red section is put on, put the rope on the pink section (the head of the bamboo man) and then pass through the hole on the left side of the pink section.

6. After the hole on the left of the rope man comes out, put on the red bar on the left (bamboo man's left hand).

7. Similarly, put the rope through the plastic sheet, then put on your right foot and body, then through the hole on the right side of your head, and finally put on your right hand.

8. Tighten it slightly after putting it on.

9. After the rope is put on, tie a slipknot at each end of the arm, as shown in the figure.

10, tie little wood blade to the slipknot.

1 1. Finally, tighten the rope so that the bamboo man's thread can be put on.