How to hook wool slippers with hearts on the vamp? Please teach

1, hook on the line (on the bottom of the special line - coarse cotton or nylon thread) in the bottom of the line above the wool hook short stitches, (if you want to be a little bit more upright can be hooked with two threads) hook four rows, the heel does not need to hook four rows.

2, start the needle: the toe of the shoe is facing you. To stay a little longer than the sole of the thread, start the needle according to the size of the sole, you can start 5, 6, or 7, stitches. In short, both sides should not be crooked, but flat. (If one side is not flat, one side can be separated by a braid and the other by a braid, or sometimes by two braids. Flexible use. (Depending on the height of the front and back).

3, in order to the vamp is not high or low, not every braid hook, to appropriate inter-braid hook, every braid hook, the vamp will be high.

4, crochet: to choose and sole size suitable for the pattern, to try to hook in the middle, the general size of the pattern is three big stitches after the start. Note: before and after to be symmetrical, before and after should be three big stitches.

Hooked is more than 20 rows (23, 24 rows of soles longer rows will also be more points) with the color of the thread is in the two medium-length stitches and for a needle change.

5, end: after hooking a row or two rows of short stitches. There is also a way to twist the needle, very thick .