Traditional Culture Encyclopedia - Traditional stories - The process of making homemade toys as a child

The process of making homemade toys as a child

Childhood homemade toys production process is as follows:

1, bubble machine.

Materials are very simple, ready to twist the stick and beads on it.

Twist the rod in the center to make a small circle, fixed with beads, and the handle are strung on the beads.

2, catapult.

Materials are very simple, popsicle sticks, plastic spoons, rubber bands, hot melt gun, scrap paper. First two popsicle roots stacked and glued together to become the base of the catapult. Prepare four more popsicle sticks to be glued two by two.

Become two sets of popsicle sticks placed vertically, and then prepare five popsicle sticks aligned and glued, placed directly on the base, and then use rubber bands at each end to fix. In the spoon will be tied to even chopsticks respectively, with rubber bands to provide for the head, the formation of the launch of the mold can be.

3, balloon hovercraft.

Tools: cardboard, white paper, colored pencils, scissors, magnets, paper clips.

To do this little toy, you need to prepare cardboard, white paper, colored pencils, scissors, magnets and paper clips.

First of all, use the color pencils to draw a cute little duck on the white paper, don't draw too big, width than.

Find a CD disc, a film canister, remove the lid from the film canister, apply a little glue to the open end to stick it to the center hole of the CD, and let the edges of the film canister heat up the glue to achieve a complete seal.

Waiting for the glue to cool down, use a peg to make a hole in the center of the top of the canister, so that the gas can come through, and then prepare a balloon, set on the canister, and then use the air hole in the inflatable, and then seal the inflatable mouth, the air cushion boat is ready.