Wheel ditcher

According to the structure type, there are two types: double-disk type and single-disk type;

According to the operation mode, it can be divided into two types: low-speed one-time ditching and high-speed multiple ditching. The traction power required by the rotary ditcher is very small, and the thrown soil can be evenly scattered in the two measurements of the ditch without trimming. However, the structure of the machine is more complicated, the productivity is lower than that of the plough, and the energy consumption per unit earthwork is higher. It takes about 0. 15 ~ 0.45 kW/ hour to grind and polish 1 m3 soil. Tractors matched with rotary ditcher should have ultra-low gear.

Large tractor suspension ditcher

The invention relates to a suspended ditcher, which is a ditcher suspended on a big four-wheel tractor.

The characteristics of this machine,

1: It is easy to disassemble and assemble, and it is installed on the tractor for less than half an hour, which does not affect the tractor's akita cultivation.

2. Convenient transportation and installation. There is no need for the customer to deliver the tractor to the factory for installation. Just send the ditcher directly to the customer's home and hang it on the tractor.

3. The operation is simple, and any user who can drive a tractor can control the ditching operation.

4. The ditching efficiency is high, about 300 meters per hour, and the daily profit is 3-4 thousand yuan.

Second, the working parameters:

Supporting tractor power: 50-90 horsepower

Working speed:150-500m/h

Trench width: 15, 20, 25, 40, 60, 80, 100cm.

Trenching depth: 0-0-2 10/0cm.

Note: The above-mentioned ditching width, ditching depth and supporting tractor model can be adjusted independently according to users' needs.

Third, the main components:

1

, tractor 2, suspension frame 3, oil cylinder 4, gearbox 5, earth-turning auger 6, ingot 7, chain knife 8, chain tensioning mechanism 9 and earth scraping and leveling mechanism.