Teaching method of crocheted wool slippers

The teaching method of crocheted wool slippers is as follows:

1. Hook shoes must first choose a good sole, and it is best to buy a wired one, which is convenient.

2. Then hook the sole with a short needle. If the size is smaller than the sole, it's almost the same. After hooking, continue to hook a circle of short needles around.

3. Then put the soles we made on the soles. Remember that the number of stitches must be evenly distributed.

4. Next, hook two short stitches at the joint between the edge and the center of the sole surface.

5. Then we can hook the vamp. First, put a long needle or a long needle (two in each group) into six to seven groups of toe hooks, and leave a certain length of thread on the left side for needle collection.

6. In the first four or five rows of the toe, the lifting needles in each row should be next to the previous row, and the lifting needles in each row behind should be separated by a needle.

7. Repeat step 6 until the hook ends.

Knitting skills:

A, support line paste method

Support wire is used when weaving rope and core wire. The length of the support line is determined by the width of the work. Fix the rope directly with a pin, and the rope will easily spread out and not be fixed firmly.

Tie a knot first, and then fix it with a pin at the knot, which is more secure. Insert the head of the pin outward at a 45-degree angle, which is not easy to pull out.

Second, the basic method of connecting the rope

Connect the braided rope and the core wire to the support wire. The following is the connection method to make the contact point inconspicuous.

1. Fold the braided rope (or core wire) in half, put it behind the support line, and bend forward at the fold.

The other end of the rope passes through this ring.

3. Then tighten.

4. That's it.