How to change the bath heater lighting bulb Notes on the replacement of bath heater lighting bulb

Mention of bath bombs, I believe that many friends are very familiar with, we have mentioned in the previous article what kinds of bath bombs, there is a class of bath bombs called lamp heater bath bombs, lamp heater bath bombs in addition to the installation of heating bulbs, but also equipped with lighting bulbs so that the design is to facilitate the family does not install lighting fixtures, so that the overall aesthetics of the bathroom to enhance, today we will be in this article to specifically introduce information about the bath bomb lighting bulbs. Today we will be in this article specifically about the information about the bath bomb lighting bulbs.

How to change the bath bomb lighting bulb

The first thing to do is to cut off the power first. Then take down the four heating lamps. You can see two hanging springs on the side of the heating lamp position, and the spring hooked to the hook of the cover plate, the hanging springs off after the overall square of the plastic cover of the bath bar can be taken down, you can see the light. After seeing the light, rotate the bulb down and replace it with a new one.

Bath heater lighting bulb replacement precautions

Can be replaced with ordinary bulbs: Bath heater bulbs are special, can not be changed, because the bath heater are explosion-proof bulbs. Lighting lamps are generally 40W. Go to the lamps and lanterns store to buy a special bulb on the line, common AC220V?275W. In addition to pay attention to the long foot, or short foot, the first time you can bring the bad old bulb with a hardware store in the community, the general price of 13 yuan, you can bargain to 10 yuan to buy some supermarkets to buy the price of 30 ~ 40 yuan. In the future, just tell the hardware store owner, such as 220V?275W?short foot (according to the first time the boss said), do not have to bring the bad bulb to the hardware store to match, are standard.

Installation details: If the home has a shower room, it is recommended that the bath bar installed in the bathroom ceiling, do not have to install another bath bar in the shower room. One is because the shower room or shower screen generally have supporting shower facilities, and the effective area of the shower room is too small, low height, relative to other spaces, the temperature in the shower room is considered very high, there is no need to install a bath bar in the shower room; if you install no special waterproof performance of the bath bar, the shower room, water vapor is too centralized to make the bath bar damp, but will be a potential safety hazard.

Bulb detection: bad contact with the head, then we just need to screw the bulb is enough. Bulb is bad, we need to replace the bulb.

In today's article, we are mainly for bath lighting fixtures to start the introduction, you can see that we will be bath lighting fixtures are divided into two parts, first we specifically introduced the bath lighting bulb bad after the specific replacement steps, because many of the user friends are not very willing to ask the maintenance master to repair, one needs to specialize in the time, the second will also incur costs. Secondly, it will also incur expenses, so you can follow our steps to replace, it is best to look at the specific precautions before replacing.