How many times have Gundam models been painted?

Say it again. This means spraying the color all over the area and counting it when it is dry.

Among them, because the scope of action of the spray gun can not cover the whole part at one time, it is sometimes called "cross spraying method".

That is to say, spray the word "one" from the upper part of the part from left to right, then move down, continue spraying one word from left to right, and repeat until the part is completely covered, then rotate the part by 90 degrees and repeat the word "one" again.

It is not difficult to say how many times it is sprayed, mainly depending on the spraying effect and the concentration of your paint. If it is very thick, once is enough. If it is lighter, you can spray a few more layers. Finally, it depends on whether the hair color is good or not to decide whether it needs to be sprayed again.

If it is electroplating spraying method, it needs multiple layers of different paint surfaces, and of course it also needs multiple spraying.

PS: I dialed the wrong number before, not the plate, but the parts. About cross stitch, there is teaching in the famous video Soul of Mould, which is a bit strange to friends who have never heard of it, because many people draw by this introduction. Of course, self-study and reading posts are not excluded. Besides, in fact, the whole board is sprayed, not without it. A few people spray it after posting it. PG does this, but it only sprays water to make up the soil. Later, it is still necessary to cut it out and spray the main color, so that the nozzle problem is solved. I wrote the whole board wrong.