Toilet lid size. Installation method of common toilet cover

Now it can be said that every household has used the toilet, and the toilet has also brought a lot of convenience to our lives. One of the toilet accessories that we must use when using the toilet is the toilet cover. If the toilet lid at home is broken, we have to replace it with a new one. But do you know the size of the toilet lid? Let's take a look together.

Size of toilet lid:

The length of the toilet lid is basically above 50cm, and many sizes have reached about 52~53cm. Therefore, the length of the inner diameter of the seat corresponding to the machine of this length is basically about 30cm, and men are more spacious when urinating in the toilet, while the length of the short toilet cleaner is basically about 47~49cm, and the inner diameter of the corresponding seat is about 27cm, which will bring inconvenience to a large part of people (especially some obese people) when using it.

Therefore, when we choose the size of the toilet cover, please measure the length from the water tank surface of the toilet to the front tip of the toilet along the center line of the toilet (that is, the length of the cover surface of the cover plate), preferably above 50cm (53cm is ideal).

The width of the toilet cover is basically between 34cm and 39cm, and the width of the bidet cover can basically be covered, so the size of the toilet cover is not important. The size between the two mounting holes of the toilet cover is preferably about 14~ 19cm. Because the lower part of the water spray rod of the intelligent toilet cover has a protruding part, the inner diameter of the toilet should be as large as possible.

Toilet cover replacement method:

1. When replacing the toilet cover, just remove the fixing bolt on the back of the toilet to replace it, and operate in the opposite direction when installing. Most toilet covers come in different sizes, and only two bolts need to be adjusted when installing. But you still need to measure the size, the spacing of screw holes, the width and length of the toilet cover, and then buy a new toilet cover to replace it!

2. Find the nut, remove it by hand and replace it with a new one. Generally, the position of the screw cap is not easy to find, some are in the light and some are in the dark. Unscrew the lid in the dark, close to the water tank in the toilet and open the lid.

Reach in with your hand and touch it upward in the direction of the water tank. You should be able to touch it, but you can't see it. 3. Different styles of toilet seats are installed in different ways. Generally, the bottom of the toilet cover is connected to the toilet, and the back is screwed down. Just reach down and find the screws on both sides, and you can unscrew the whole cover. It's simple. You might as well try it at home.

The above contents are the introduction of toilet lid size and the replacement method of toilet lid. I hope these contents can be explained to you clearly, so that you can replace the broken toilet seat conveniently.