Traditional Culture Encyclopedia - Traditional stories - Is it better to use open flame or infrared rays for gas stoves?

Is it better to use open flame or infrared rays for gas stoves?

Is it better to use open flame or infrared rays for gas stoves? Infrared ray is very good

Infrared ray has a longer wavelength than visible light, has thermal effect and strong penetration ability, and is not easily absorbed by the atmosphere. Therefore, the infrared gas stove has obvious energy-saving effect.

Infrared rays themselves carry energy. People feel warm when the sun shines on them. Because of this feature, there are many infrared products on the market, such as infrared health underwear, infrared household heaters, infrared temperature measurement and so on. Infrared stoves are made by using these characteristics of infrared rays.

The energy-saving efficiency can reach more than 35%. The infrared radiant panel made of special refractory can convert the flame into infrared rays when it burns, and accelerate the heating process of the object. Due to the transmission of infrared radiation, the efficiency of gas stove has been greatly improved.

It is rare that the bottom of the pot is really blackened by infrared rays. Infrared rays can concentrate firepower, but not enough to remove the bottom, and it is easy to produce more toxic gas.

Is it better to use infrared rays or ordinary blue fire for gas stoves? First, it is best to use ordinary blue fire for gas stoves.

Two: the flame of the gas stove is blue fire, which means that the gas is fully burned. Moreover, the substances produced after combustion are harmless to human body, and long-term use of infrared rays will cause certain radiation to people. Not recommended.

Thirdly, the gas stove supplies natural air to the gap between the furnace body and the upper cover to supplement the air shortage during combustion, thereby promoting combustion and reducing the generation of carbon monoxide and nitrogen oxides, especially by supplying natural air to the gap between the furnace body and the upper cover to supplement the air shortage during combustion, thereby promoting combustion and reducing the generation of carbon monoxide and nitrogen oxides.

Whether the natural gas stove is infrared or blue flame depends on the heat released by the combustion of natural gas and air.

When the ratio of gas to air is appropriate, the combustion is the most complete and the calorific value is the highest, so the gas is not wasted.

At this time, the flame color is light blue.

Is the traditional gas stove better or infrared energy saving? It is safe to buy traditional gas stoves. The safety of gas stoves is still the most important.

Is it better to replace infrared ray with driving recorder or not to replace infrared ray? There is no infrared ray on the market at present! Xuancheng infrared rays all have light sources, which means you can see as far as the light is. It is better to turn on the headlights. Just buy an ordinary one.

20 15 infrared gas stove or rotary stove 1 depends on your home usage. If you cook with a pointed bottom pot, it is a bit inappropriate to use an infrared stove. If you use a pot, it is fuel-efficient and convenient.

In addition, it depends on whether you need a big fire to stir-fry or a relatively small fire to ignite. The load of infrared cookers is generally around 3.4KW, and the load of general cookers is 4.0KW in terms of efficiency. Now many rotating fires are above 4.5.

One of them is that infrared cookers are not so convenient to maintain and the thermal efficiency is not as high as expected compared with ordinary cookers. In Guangdong and Guangxi, it is not bad to use reflection.

Is the cooker infrared or spiral? Advantages of infrared ray; High thermal efficiency, gas saving, generally do not smoke pot.

Disadvantages of infrared ray: the infrared heating plate is flat, and it is easy to block the air hole after overflowing the pot.

The thermal efficiency of spiral furnace is slightly lower than that of other furnaces.