What are the installation steps of snow chains?

The installation steps of snow chains are as follows: 1. Clean the foreign body on the driving wheel of the car and put the snow chain in the center of the front of the tire; 2. Drive the car forward until it exceeds half the length of the snow chain, so that the purpose of putting the car in the middle of the snow chain is to save labor; 3. After the car stops, fasten the hook near the inner side of the tire, then fasten the hook near the outer side of the tire, and tighten the chain with tools; 4. Drive the vehicle forward, adjust the joint installed at the stressed position, and fix the tire chain. The snow chain on the other side is also installed in this way. The problems that should be paid attention to after chain installation are as follows: 1. Avoid sudden braking, rapid acceleration and sharp turns when driving. If the chain runs too fast, it will slip and there is no safety guarantee; 2. The speed should be controlled by tires with snow chains, and the speed should not exceed 40 kilometers per hour.