How to make a rattle?

Abstract: rattle is a traditional toy that children love. The existing rattle comprises a handle, a drum body is installed at the upper end of the handle, two sides of the drum body are respectively provided with connecting ropes, and billiards are fixed at the hanging ends of the connecting ropes. When in use, the handle is rotated by hand, so that billiard balls on the two connecting ropes hit the surface of the drum body back and forth, resulting in drumming sound. Although the structure is simple, it is deeply loved by children. Here's how to make a manual rattle. How to make a rattle?

Method 1:

Materials: watercolor, wooden stick, adhesive tape, rope, small wooden beads, round box (made of cardboard) that can be locked.

Steps:

1. First, draw unconstrained patterns on both sides of the circular box.

2. Thread the rope with beads (painted) and string them on both sides of the round box.

3. Pass through the bottom of the round box, fix the bottom and top with adhesive tape, and then seal the round box with adhesive tape. A simple and fun rattle is done by DIY!

Method 2:

Materials: balloon, hollow metal sleeve (if there is no hollow, you can only dig it yourself), scissors, wooden stick, glue, two wooden beads and rope.

Steps:

1, cut a balloon.

2. Hammer out a dent on two bottle caps with a hammer.

3. Put the balloon on two lids.

Apply glue to the edge of the lid, then put the stick in the dent and put the rope horizontally in the middle.

5. Paste another cover with the dents aligned.

6. Wooden beads are tied at both ends of the rope, and a simple rattle is completed.

Method 3:

Materials: gouache pigment box (other empty cans can also be replaced), two soybeans, bamboo sticks (disposable chopsticks are enough), art knife and cotton thread.

Steps:

1. Punch a hole with an awl.

2. Poke the bamboo stick into the drum.

3, two soybeans, cut a hole that is not deep or shallow enough to insert cotton thread with a utility knife.

4. Before tying the cotton thread, you can also pinch it at the incision with your thumb nail, which will make it easier to embed the cotton thread, and then tie it around with a dead knot.

5. Stick fermented soya beans's legs on both sides of the drum body, and a simple rattle will be completed.