Illustration of binding method of fish dart rope

How to shoot fish with a fish dart? Fish darting fish tutorial-1. First, replace the leather bag on the slingshot rubber band with nylon rope, so it can be used to shoot fish darts. If you can't, you can buy some rubber bands that specialize in shooting fish. 2. Tie one end of the fishing line to the fishing reel, then wrap the fishing line around the fishing reel and tie the other end to the dart. This set of fish darts is ready.

Traditional slingshot shooting fish skin and tendon binding method? ——? Shooting fish requires special arrows and take-up pans. And the self-woven shelf on the slingshot. Or wire

Fish line 8-shaped ring binding method? —— Method 1: Fold the two threads in half, pinch the three strands together with the right hand, and each of the left and right hands holds the short thread around the three strands for about 6 times, then thread the thread through the folded loop once, and both threads are tightened at the same time. way

How to properly tie the fishing line and fishing rod? ——? Connect the fishing line with the rubber band with the connecting ring, and then tie the rubber band to the fishing rod. First, the fishing line is wound around the fishing rod, then the two ends of the main line are knotted and the middle can slide. In this way, two ic knots can be tied on the main line to make a ring. This method of tying the fishing line to the fishing rod is the most convenient. ...

Schematic diagram of the steps of fishing line binding method-1, travelers who thread fishing lines into space beans; 2. Slide the space beans into the fishing line; 3. Tie a figure-eight knot under the space bean and tie the figure-eight tightly; 4. Tie an 8-shaped knot above the space bean; 5. The two 8-shaped knots play the role of fixing the space bean, so that the space bean does not draw two 8-shaped knots. ...

How big is the rubber band of the fish-shooting card? -Then 3060, 4 tow 2, then 4 tow 2 plus inside penetration. I changed the top card and used 3060 inner wear 1745, 4070 inner wear 1745. (3070 didn't make a good rubber band), now it's basically 3060 1745(4070 rubber band doesn't feel good either). Fish dart river basically kills 26 grams of Kun at close range and 30 grams of Kun and willow shark at a long distance.

Fishing line binding method? -1. Slipknot method 1. Tie a double-knot Shekou rope at the front end of the pole tip. The shorter the knotted Shekou rope, the better. 2. Nodules at the top of the main line are folded in half to form a double circle. 3. Pinch the fishing line knot at the intersection of the coils, put it on the fishing rod and tighten it. 4. If disassembly is needed, just grab the thread and pull it out.

How to tie the fishing line? -Other ways to tie the fishing line? 1, fishing line knot: After the fishing line is ready, first tie a knot on it to make a fish circle. This knot needs to be an ic knot and cannot be changed after it is tied. 2. Give the fishing line a rebate: Then you need to put two fingers into this circle and press both sides of the fishing line with two fingers.

Diagram of the tying method of fishing line-The tying methods of fishing line include: valve core connection method, movable collar connection method and space bean connection method. 1. The valve core connection method ties the head of the soft belt to the pole tip with a knot and folds it into a semi-circular arc. Take a piece of valve core and put it on the soft belt, then thread the fishing line through the soft belt ring and tie a knot.

How to bind fishing rod tail rope? When tying a knot, we first turn the rope back in pairs, and then make a circle to the right or left. Hold the intersection with your fingers and rotate the coil clockwise for two or three times with your other hand. Then thread the rope head out of the front ring. The next step is to tighten. When tightening, make sure to connect the knot to the rod tip as much as possible.