How to tie the laces of this kind of leather shoes? I'm not sure how to do it.

How to tie the laces of this kind of leather shoes?

Leather shoes should be so tied, if the sneakers have other ways to tie. If you tie a very fancy will be significant shoes without class.

How to tie round laces to look good?

The following are references....

1, cross method method:

1. The head of the shoelace from the bottom of the flat straight through and from the bottom of each hole up through.

2. Cross the lace head and thread it through the other two holes respectively.

3. Repeat this process until the laces are threaded through the top two holes.

Evaluation: Traditional Simplicity Comfort Whether wrinkles Remarks: It is a favorite and comfortable way to tie shoes, mainly because the laces cross in the middle of the grooves between the two sides of the upper, so they do not squeeze the top of the foot.

2. Upper and lower lacing method:

1. Thread the head of the lace from the bottom straight through and out from the top of each hole downwards. 2. 2. Cross the lace head from the bottom and thread it through the second pair of holes from the bottom up, then cross it from the top and insert it into the third pair of holes.

3. Repeat this process until the laces are threaded through the top two holes.

VERDICT: Decorative Convenient Less wear NOTE: If there is an odd number of pairs of holes, thread the laces from the bottom up to ensure that the laces cross underneath the top pair of holes as they are threaded through the top pair of holes.

Round canvas shoes laces how to tie good-looking, seek diagram

Converse laces tie method one: slash knot 1. Through the first hole after the inside of a single knot, the other end of the inside out through the left side of the third hole; 2. Shoe laces and then from the right side of the second hole through; 3. With blue laces to complete the slash knot look; 4. With the white laces in the opposite direction to play the slash knot; 5. The same method with the blue laces; 6. Blue and white laces eventually from the tongue part of the hole out; 7. From the tongue part of the wear out of the look; 8. Tie a little loose more good-looking. CONVERSE/Converse 12 new unisex Chuck Taylor All Star vulcanized shoes, low-key and infinite flare, high-quality leather on the delicate show, the toe of the exquisite tread line. Designed with a stylish decorative zipper, highlighting the hard. Rubber sole pattern is clear and natural, anti-slip and wear-resistant while maintaining the lightness of the shoes. Converse shoelace tying method two: cross knot 1. one end in the inner knot, the other end in accordance with the order of the holes; 2. jump a hole through; 3. in accordance with the same method of tying down; 4. repeated after the rest of the shoelace tucked into the inner knot processing; 5. purple shoelace is also in accordance with the same method, in accordance with the order of the holes; 6. from the bottom in, and then from the top out; 7. according to the color of the shoes to choose the harmonies of the Laces; 8. Extra laces are knotted on the inside. Converse shoelace tying method of three: trapezoidal knot 1. adjust the length of both ends of the shoelace, from the inside to the outside to pull out the shoelace; 2. pull out of the shoelace, from the outside to the inside into the second hole; 3. the left side of the shoelace from the right side of the shoelace between the two holes underneath the shoelace to wear out the right side, the right side of the same; 4. repeat the operation; 5. pay attention to the direction of the two ends of the cross lace; 6. the excess lace stuffed inside the shoes to tie a knot processing; 7. the completion of the trapezoidal knot.

Leather shoes laces are very long, how to tie to look good

After the laces are tied, there will be a circle, two single head (bow is two circles). First, take a circle as an example. Pull the two sides of the circle lightly, one side is alive, one side is dead. At the same time, when pulling on the live side, you will find that one single head also moves at the same time, and the other does not move. Now, pull on the live side of the circle with one hand and the dead single head with the other! (Be careful not to break it!) The harder you pull, the tighter it will be. The two circles as long as you pull the two active circle edge, and then the same divided into two hands at the same time to pull on the line

Leather shoes laces too long how to tie good

The simplest and fastest can be tied in a bow Oh

How to tie a short leather shoes laces look good

Simple bow

Round shoelaces suitable for what shoes

Round laces are more Suitable for the following types of shoes:

1, low state, small round head, no heel (heel not higher than 2cm), flat instep, part of the position of the suede decorative shoes

2, high state (tube height of about 8 inches), small round head, medium heel (heel not higher than 4cm), flat instep, suede + Oxford cloth shoes

3, climbing shoes (high state, large round head.), the back of the feet thick and a little warped, The back of the foot thick and a little up, big thick bottom, all suede or all bright leather

4, other casual shoes (not canvas shoes or business shoes)

For example, you can refer to the picture:

How to tie round laces will not fall apart, found that many people will not tie laces

Cross cross and then fold the cross cross tight

Round and thin kind of Shoelace how to tie ... so easy to loose

two under the bow

fine cylinder laces how to tie shoelaces

a few good-looking shoelace tying diagrams: a cross cross knot 1, one end of the knot in the inner, the other end in accordance with the order of holes; 2, jump a hole through; 3, in accordance with the same method of tying down; 4, repeated after the remaining After repeated, the rest of the shoelace stuffed to the inner knot processing; 5, purple shoelace also in accordance with the same method, in accordance with the order of holes; 6, from the bottom through the ... .5313