How to Make Cloth Shoes

How to make cloth shoes:

1. Make the soles

A good pastel first. Method: Put the old strong cloth, my family used the old bed sheet or old quilt cover and old jeans layer by layer with paste (glue can not) pasted together on the door or board, table, and so on drying after the pasties on the good.

B According to the paper pattern or the baby's feet cut out four bottoms and two heels.

C Cut a number of white piping (cut diagonally), paste the piping to two of the soles and two heels on the edge, and cut two white cloth soles 1.5cm wider than the soles look like the soles of the shoes wrapped up and glued with paste, pressed flat,

D will be made of two kinds of soles stacked together, the heel to the middle of the layer of the corresponding part of the code neatly, and then glue it together with a needle, and then use the paste to make the soles. Stick together, and then use the needle to sew a circle around the bottom, and then in the center of the densely sewed vertical stripes of stitching, the bottom is good.

E Note that when the flute, be sure to use a strong line, I use a thick polyester thread 6 strands synthesized into a heel; and each time you have to use an awl to make a hole before you put the needle through; pull the line must be tightened, so that the bottom of the sturdy, not easy to wear out.

2. Do the upper

A paste (glue can not be) both sides of the paste on the cloth, the outer layer of paste two layers of cloth, the inner layer can paste a layer of soft flannel and so on, in accordance with the shoe sample cut out a pair of vamps of paper.

B Sew the upper together and flatten it with scissors.

C Cut white and other colors (to match the upper) piping about 2cm wide, and use other colors (to match the upper) to piping the upper side of the shoe. The lower part of the upper is edged with white piping.

3. Make the inner bottom of the shoe

Take several layers of soft cloth, cut out 2 bottoms according to the paper pattern, roll the white edges around them, and then turn concentric circles along the edges to the center with the sewing machine, the same way as the insole of the turn.

4. On the shoes

Narrow the bottom, the bottom of the shoe, the shoe face, around the sewing circle, it's done.