The best way to prevent water leakage

The best way to prevent water leakage is as follows

1, traditional method Traditionally, this situation is generally caused by problems with the waterproof layer, so it is generally to pry open the tiles outside, then dig up the waterproof layer, make waterproof again, and then lay the tiles. This method requires a lot of manpower, material resources and time, and it consumes a lot.

2, the latest method The traditional method is to make up where it leaks, but now the new method is to abandon this concept and directly do waterproof and leak-proof work on the outer layer of ceramic tiles. In fact, as long as the outer surface of ceramic tile is waterproof, the waterproof effect is the same.

3. For newly-installed or refitted users, it is suggested that cement mortar should be used to level the floor before waterproofing, which can effectively prevent leakage caused by uneven thickness of waterproof coating.

4. During construction, we should earnestly urge relevant personnel to handle corners and some inconspicuous places, and all waterproof coatings must be painted in place to avoid problems.

5. After the construction, waterproof test must be carried out. The specific operation method is to plug all the hand holes in the bathroom, pile a 25 cm high "ridge", then pour 20 cm high water into the bathroom, and see if there is any water leakage after 24 hours.