Tote bag illustration design - how to draw the bag

Tote Bag Flower Arrangement Video Tutorial

Tote Bag Flower Arrangement Video Tutorial is as follows:

First step: we have to start the cellophane square into the bag cushioned, according to the depth of the bag and the height of the mud to cushion the bag, the purpose of which is to the bag and the height of the mud in the distance between the two fingers in the bag, in the bag to put the cellophane and another purpose is to prevent the bag from leaking, resulting in The bag has another purpose, which is to prevent the bag from leaking, causing damage and affecting the beauty.

Step 2: According to the volume of the bag size of the flower clay cut, suitable for the bag can be.

The third step: the mud into the bag, around the extra cellophane should be cut, cut the degree of cellophane below the mouth of the bag can be, cellophane can not be exposed, otherwise it will affect the aesthetic.

The fourth step: pick up the bag, look at the clay flowers in the inside of the shaking, if there is that is not balanced or not fixed, you can use cellophane to fill the edges of the clay flowers in the clay fixed clay.

Step 5: Then according to our original design of the floral architecture with pink rose to insert the approximate shape, pink rose stem must be diagonal cut mouth, leaf insertion orientation should be not only upward, but also downward, to present a natural state.

Sixth step: handbag flower arrangement in the insertion of roses, four sides should be inserted with roses, before and after the left and right to arrange the flowers, this time do not rush to fill the handbag with flowers, you can first insert a few flowers, and then according to the actual situation in the filling.

Seventh step: Eucalyptus leaves should be staggered in order to insert, naturally hanging to the edge of the mouth of the handbag, appropriate to extend a little bit are feasible, you can enrich the volume of the handbag, and then the use of blue daisies and yellow warbler grass to fill.

Note: multiple small daisies and yellow warbler grass does not need to be too high, moderate hidden in the flowers and eucalyptus leaves in order to look good. Immediately after filling some colorful starry sky to supplement the gap can be, these beautiful handbag floral arrangements are born! Usually you can water on the flower clay, so you can extend the life of the bag flower arrangement!

How to use ps to make handbags

Methods/Steps

1

Import the design and do the projection relationship

Import the front of the handbags design picture - to create a black gradient layer (the bottom of the darker, taking into account the effect of the actual light and shade) --Convert the adjusted image to a smart object.

Do perspective deformation

The front of the manuscript has been converted to a smart object imported into the canvas to do the effect - the implementation of the Edit - Transform (to do the perspective of the upper large and lower small deformation, in line with the perspective of the near large and far small)

The front of the bag design picture - create a black gradient layer (the bottom darker, taking into account the actual light and shadow effects) - the adjusted picture.

Drawing the shape of the bag 1

Tap the Pen tool to simulate drawing the shape of the inner edge of the bag, and fill the relevant color (I want to do a similar sense of technology here, electronic production of the bag, I chose the blue).

Drawing the shape of the bag 2

ditto with the Pen tool in the drawing of the bag side of the shape of this side of the elements, so that the initial completion of the bag's approximate rendering (pay attention to the relationship between the top and bottom of the layer here).

Adjust the body of the inner light

Inside the shape of the inner edge to add a black gradient fill, press Alt + new adjust fill layer to create the following screenshot of the position of the arrow (under the black on the bright, the same simulation of the actual effect on the).

Strengthen the overall highlights and shadows

With step 3 with the pen tool in the handbag on the edge of a thin line, and fill white, the same way to do in the box inside the edge of the shadow effect, (do the shadows can be used in conjunction with the use of Feathering and Blurring, so that the shadows look natural) to this part of the cooperation has been basically completed.

Do handbag hanging holes

Two new black fill round hole - to the round hole to add a relatively weak external light (the main parameters of the transparency of the low, the expansion of the parameters of the high, the expansion of the role of vignetting similar to the role of the mask) - and then add a projection layer style to the round hole (projection size close to the size of the expansion of light, so that the overall three-dimensional, and not because of light feeling distorted).

Drawing the rope of the handbag

Use the pen tool to outline the shape of the rope of the bag, and add a shadow layer color, so that the bag of three-dimensional sense of some strong.

Do the projection of the handbag rope

Copy a drawing of the handbag just drawn - mouse click on the layer - right click - rasterize layer --Fill black - Ctrl + T Transform (pull a little to the right to simulate the effect of projection onto the front) - Filter Blur -Gaussian blur to make the projection of the handheld rope.

Adjust the rope tone

Rope feel still black enough, you can create a new layer into the color of some black, so that the overall feeling has been there.

To do the projection of the bag

Finally add a projection to the bag to make the overall effect more realistic (+ projection specific steps can see my previous experience).

How to draw a bag

Plastic bag sketch, plastic bags are widely used because of its cheap, very light weight, large capacity, easy to organize the advantages, but also because of the plastic bag degradation cycle is extremely long, difficult to dispose of, so many people have reduced the use of plastic bags. Today to bring you a plastic bag sketch, interested in drawing it!

Drawing bags in four steps, the mnemonic is: a four-square block, plus a diagonal road, and then poke two holes, plus a handle, a beautiful handbag sketches on the drawing. Tote bag is a simple bag, the production of materials such as paper, plastic, non-woven industrial cardboard. Below to take a look at the sketch of a handbag step-by-step drawing.

Shopping bags are designed for supermarkets, shopping malls and other places. Supermarkets, shopping malls in order to facilitate consumer shopping, the purchase of goods transported home, linked with the consumer's feelings and design a special bag. Tote bag is a simple bag, the production of materials such as paper, plastic, non-woven industrial cardboard. Now you are not more understanding of the bag!

The garbage bag drawing method is as follows: First step: draw a garbage bag handles. Step 2: Draw the other handle. Step 3: Draw the knot between the two handles. Step 4: Draw the body of the bag. Step 5: color, garbage bag sketch is complete. Introduction to the garbage bag, as the name suggests is a bag of garbage ...