Manual course of Christmas wind hair accessories

The manual tutorial of Christmas wind hair accessories is as follows:

Materials: white lace, narrow ribbon, a clamp, a socket, a pair of 9 pins, a pair of metal rings, a pair of pendants, and some beads.

Steps:

1, with burgundy wide ribbon, golden white lace, green narrow ribbon, burgundy ribbon and white narrow ribbon. Cute people can choose any material and color they like. In cold season, thicker velvet is also a good choice.

2. Today, we need a wire clamp, a socket, a pair of 9-pin, a pair of metal rings, a pair of pendants and some beads.

3, now start processing software, because hair accessories should be layered one by one, so Xiao Y decided that each piece should be shorter than the previous one. The main red ribbon is the longest, followed by golden lace. The red ribbon on the accessories is longer and the green ribbon is shorter. The white spinning belt is the shortest and should be as long as two. Trim the burr with scissors after cutting, and then burn it with a lighter.

4. Take out the thread of the corresponding color and sew each material in half, so as to get four rings. You can sew the shortest and thinnest white yarn first, because it is really difficult to start. The ring is too round to operate. You can flatten it a little first.

5. Take out the needle and thread again. Sew the burgundy ribbon and the golden lace together first, and then sew the burgundy ribbon and the green ribbon together. You can stick a little green ribbon on the outside to cover the seam marks. Compared with glue stitching, it is really easy to use and will not leave a hard knot.

6. Now, the pendant has been processed. First, open the 9-pin ring with needle-nosed pliers, hang the pendant, and then thread the beads into 9 pins according to the size. If the remaining part is too long, you can cut off a part, then bend the 9-pin with the needle-nose pliers and hang the metal ring. It's really difficult to thread the newly cut white spun yarn belt into the metal ring. It took several times to put it in.

7. Stick a container and beads on the top of the green ribbon. The combination of gold and red is folded into a bow shape and stuck together, and then gauze with pendants is stuck under the bow, where it can be covered with ribbons.

8. Finally, stick the green part on the golden red part, and then stick the pressure clip on the back of the hair accessory. A delicate and beautiful hair accessory is ready!