Operating procedures for woodworking lathes?

1. The workplace should be equipped with complete and reliable fire fighting equipment. Smoking and other open flames are strictly prohibited in the workplace, and flammable items such as oil and cotton yarn are not allowed to be stored. 2. The wood to be processed and processed in the workshop should be neatly stacked to ensure smooth roads. 3. The machinery should be kept clean, the safety protection devices should be complete and reliable, the ministries should be closely connected, and sundries should not be placed on the workbench. 4. Check the various parts of the lathe devices, tools and fixtures, flexible and reliable. The workpiece should be clamped and jacked by thimble, and it should be turned by hand for trial operation. It can only be started after it is confirmed to be in good condition, and according to the hardness of the workpiece wood, select the appropriate feed speed and adjust the speed. 5. In the process of turning, it is not allowed to check the smooth procedure of the workpiece by hand. When grinding, the tool rest should be removed first. When the lathe rotates, no matter whether there is power failure or not, it is not allowed to brake by hand. 6. The square wood must be processed into a cylinder before lathe processing. Do not cut wood with knots or cracks on the lathe. 7. After the operation, cut off the power supply, lock the brake box, wipe and lubricate, and remove sawdust and shavings.

For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd