How to make the essential faucet for every household?

Basically, every household in our country will be equipped with different types and styles of faucets. Faucets are also a common commodity in hardware stores. So how is the faucet that is essential for every household made? The manufacturing process of faucet is divided into three steps.

First, the worker puts the brass nozzle tube on the rotating bracket, and the machine automatically carries out trial welding on the inside of the nozzle. Then the worker presses the thread end into the nozzle. This is a factory that specializes in making faucets. The other end of the copper tube is coated with flux and then connected to a piece of brass. Under the high temperature heating of welding tool, brass nozzle and brass block are welded together.

Secondly, next, the faucet nozzle will be polished by the polishing wheel to make its surface appear mirror effect. Then put the faucet into an acidic solution in which molten metal is dissolved, and apply a thin and uniform coating on the surface of the faucet, and other parts of the faucet will be treated in the same way. At the same time, the blade cuts a small piece on the solid copper bar, which will accommodate a ball valve to control the water quantity and temperature.

Third, then the workers began to assemble copper pipes and brass fittings. The faucet passes through the bottom plate and is fixed on the sink platform with screws. Next, the machine puts half a stainless steel ball on the turntable to determine the direction. Then the automatic welding machine welds the two hemispheres together, and the opening on the stainless steel ball is used to adjust the water flow into the nozzle. In the assembly process of faucet, all joints need to be inserted with rubber plates. The gland filter is screwed on the nozzle, and finally screwed on the faucet with a metal valve cover, thus making a faucet that can control the water quantity and temperature at will. It only takes two days to make such a faucet, which can be said to be extremely fast. After the finished faucet is tested, it can be packaged and delivered for sale. At this point, the production process of the faucet has all ended.