Paintshop Teach you how to paste gold leaf

First sanding to paste the part of the gold leaf, in the wooden tire type to brush the primer, wait until the primer is dry and then sanding for use. Step 2: Brush the foil adhesive. In the need to paste the part of the gold leaf as much as possible to apply a thin layer of glue (water-soluble foil adhesive); can also be sprayed with a spray gun, at least two times. Brush by hand, pay attention to inspect the missed part of the brush, if there is a leakage of brush to be repaired. Step 3: Stick the gold foil. Wait for the glue to dry a little, (Paintshop suggestion: you can use a hair dryer, blowing the hair dryer against the part coated with foil adhesive, so that the water-based foil adhesive water will evaporate faster, you can shorten the working time). Stick the gold foil surface to the glue coated part, use wool brush to the gold foil liner surface, and apply a little force to make the gold foil surface and the surface coated with the foil adhesive closely, and then peel the liner off from the gold foil. Step 4: Check the loopholes. Check the surface of the gold leaf workpiece, find any leakage can be repaired directly with gold leaf (Note: Be sure to have a soft bristle brush to fill in the dry gold leaf from the new). Part 5: Polishing. After checking that there is no leakage of gold leaf, use a soft wool brush to polish the surface of the gold leaf. (You need to apply a little strength, along the gold leaf linking seam) to rub off the traces of linking between the gold leaf, so as to make the gold leaf bright, linking with the natural. Step 6: Protective paint. 24 hours after the completion of the work, then spray a layer of protective paint on the surface of the gold leaf. (Paintshop suggestion: generally use polyurethane varnish or water-based protective paint).