Wiring method of gas stove

The wiring of the gas stove is a very important part, if not wired correctly may not only lead to gas leakage, but also may lead to damage to the appliance and the risk of fire. The following is the wiring method of the gas stove:

1. Understand the electrical principle of the gas stove: the gas stove needs power to work, in general, the electrical appliances of the gas stove consists of an igniter and a safety valve. The igniter is responsible for converting electric current into sparks to realize ignition, and the safety valve is responsible for controlling the flow of gas to ensure the safe use of gas.

2. Choose the right power supply: the power supply of the gas stove can be 220VAC power or 6VDC power. If it is 220VAC power supply, you need to use three power (fire wire, zero wire and ground wire) for docking, while 6VDC power supply needs to use two (positive and negative) for docking. Be sure to check that the power supply complies with the regulations and that the wires are long enough before docking the power supply.

3. Wiring method: First open the junction box of the gas cooker, extend the wire from the box, and then choose the wiring method according to the type of appliance. If it is 220VAC power supply, just connect the fire wire to the igniter and safety valve, and the zero wire and ground wire to the stove and valve respectively. For 6VDC power, connect the positive pole to the igniter and the negative pole to the safety valve.

4. Precautions: When wiring the gas cooker, please be sure to pay attention to the following points: 1) Use a compliant power supply and get professional help. 2) Be sure to cut off the power supply before wiring to avoid electric shock. 3) Be sure to use insulated wires when wiring, and mark the ends of the wires so that you can locate the problem quickly when you do maintenance in the future. 4) After the completion of the wiring, check and make sure that all the electrical appliances can work properly to avoid finding problems when they are not working. work properly to avoid discovering problems too late.