Correct fishing method of double lead in wild fishing

The correct fishing method of double lead in wild fishing is as follows:

First, the double lead fishing method:

(1) Double pendants are installed on the main line, and the difference between the two pendants is about 10 cm.

(2) Add lead skin to the lead pendant, the weight of which is just enough to make the tail of the float almost flush with the water surface.

(3) Then, add a small lead skin on the lower lead pendant, and the weight of the two lead pendants just pulls the tip of the float below the water surface.

(4) When fishing, just pull the float upward for 2~3 meshes. At this time, the state of the hook bait at the bottom of the water is generally: it falls in the middle of the water, slightly falls to the bottom of the water, and is undercover with double hooks.

Second, run the improved version of the lead:

(1) For normal semi-Shui Piao adjustment of platform fishing, it is suggested that the floating body is only pressed into the water and the whole floating tail is exposed out of the water.

(2) Then add lead skin on the water drops, so that the floating tail is exposed for 3-5 meshes, and the distance between the upper and lower water drops is 5- 10 cm.

(3) After the lead cover is rolled up, it is suggested that the space beans on the lower lead cover seat be safely opened for about 5cm, so that the lead can slide freely on the main line.

Third, the line leads:

(1) The main line is a single pendant like ordinary fishing, and the weight of the lead pendant still reveals the whole floating tail.

(2) Then the double hook line, install a small lead pendant (the position of the pendant is about 1 cm higher than that of the short sub-line) on the long sub-line.

(3) By increasing or decreasing the lead skin of the small lead pendant, the tail tip of the float is roughly flush with the water surface.

(4) When fishing, hook the bait with a double hook and pull up the float to expose 1-2 mesh.