Introduction of ceiling decoration method

Ceiling is a traditional way of decoration, which has a strong decorative effect, so it is still the main way in family decoration. Because the ceiling materials are more and more abundant, the process of decorating the ceiling has also changed. So, what's a good way to decorate the ceiling? Next, I will introduce you to the method of decorating the ceiling. Let's have a look.

Firstly, the methods of ceiling decoration are introduced.

1. elastic line: according to the height of the floor, use the vertical vector of a ruler to reach the design height of the ceiling, and pop up the keel position line on the roof and the ceiling horizontal line on the wall.

2. Install the main keel boom: after the height line of the ceiling and the position line of the main keel are fixed, determine the height of the lower end of the boom. According to the position of the main keel and the spacing of suspension, one end of the bolt and the expansion bolt are fixed with bolts. Under the floor.

3. Installation of main keel: provide a hook nut, which is hidden on the main keel in advance. Assemble the hanger of the main keel, connect the main keel, install the connector, adjust the height and straightness of the stay wire, attach the main keel to the installation hole, and set and connect the clamp.

4. Install the secondary keel: according to the perforated secondary keel parting line, hang the triangular pendant of the keel on the secondary keel with wooden keel, and hang it on the main keel through the triangular pendant, and straighten and fix it.

5. Installation of side aluminum bars: the specifications of the side aluminum bars are 25mm*25mm, and the height of the ceiling requires cement nails to fix the side aluminum bars around the wall.

6. Install the aluminum gusset plate: When installing the aluminum gusset plate on the ceiling, lightly press the edge of the flange part, then completely insert the square plate into the auxiliary keel, and then push it tightly. Arrange lights and vents, make holes according to the size of lights and vents, and then install lights and vents.

Second, the matters needing attention in decorating the ceiling

1. When using wooden keel or light steel keel, try to use light steel keel. This is because the drying shrinkage and shrinkage of wood easily lead to structural deformation. Attention should be paid to expansion joints in design and construction. Each joint should have an expansion joint and be inverted at a 45-degree angle to avoid stress accumulation.

2. Light steel keel or wooden keel should be laid flat with standard spacing. Self-tapping screws should be evenly distributed to ensure that the stress of each self-tapping screw is close, otherwise it is easy to form side locking reaction, leading to structural instability and deformation cracks. If your house is relatively large in space, there are relatively large types of ceilings, such as gypsum ceilings, glass fiber cotton ceilings, plywood ceilings and so on. These ceilings are beautiful and have the function of noise reduction.

3. If the height is very low, even less than 2.5 meters, then it is not suitable for a large-area ceiling and can be hung in a small area. For example, a circle with a width of 10 to 20cm and a height of 10 to 18cm is placed around the room, and the upward light is built in, while the middle part is kept at the original height, so as to paint. For tall rooms, you can choose the type and shape of ceiling, such as arc roof, dome, square roof, shaped roof, or two or even more floors of ceiling, or large ceiling to reduce the height.

4. Concealed works should be carried out when the ceiling is designed. Whether the air conditioning, video and audio circuits need to be hidden in the ceiling, the lighting mode and installation position of lamps should be arranged in advance, otherwise only the circuits can be photographed in the future, which will affect the appearance.

The above is the introduction of the method of decorating the ceiling that we bring to you.