How to adjust the traditional fish float?

Beginners learn to fish and float. Britain pulled the buoy to the expected water level. Throw the hook and plumb hammer to the pre-optimistic point, and adjust the height according to the performance of the float. Details are as follows:

1, pull the fishing rod from the contracted state to the longest, and install the hook, float and plumb.

2. Roughly estimate the water level, and then pull the float to the estimated water level.

3. Throw the hook, perpendicular to the optimistic point in advance. If the float sinks, it means that the water level is deeper than estimated. If the float falls on the water, it means that the float has risen.

The water level is shallower than estimated. Adjust the level according to the performance of floating, raise it a little when sinking, lower it when landing on the water surface, and try to adjust it slowly.

5. Under normal circumstances, that is, the float stands in the water. If the float stands up, more parts will sink into the water, which is the fishing point. When testing the water, you must always stay in one place. If you change places, you must try the water again.

Precautions:

1, don't throw the pole full, throw it too full, and it is inclined below the waterline. Normal pressure line, the wind line must be pressed into the water. Measure more points around the fishing point to detect whether the underwater terrain near the fishing point is uneven.

2. Don't touch the space bean at the top of the floating seat, because it is a positioning mark for you to roughly find the bottom.

3. When the floating adjustment finds the bottom again. Don't move anything on the wire group yet. Rub the opened bait on the bottom hook, that is, the long line, according to the normal fishing position and throw it into the fishing point.