Beijing Lantu coloring design Tianjin Junchen decoration glass partition wall construction methods

1, measurement and placement: according to the design drawings size measurement and placement, measured the elevation of the grass-roots level, the center axis of the glass wall and the upper and lower parts of the stainless steel grooves, the position of the closure? Line.

2, pre-embedded iron parts of the lower part of the side of the upper glass tank installation: according to the size of the design drawings to install the bottom of the slot steel parts, fixed with expansion bolts, and then install the upper part, the side of the steel glass tank.

Tuning straight, and then fixed.

Installation of the slot mat bottom tape, all non-stainless steel parts painted with anti-rust paint.

3, glass block installation and positioning: tempered flat glass all in professional manufacturers, transported to the site.

First of all, the glass tank and glass block clean, with glass installation machine or tray suction cups will be placed in the installation of glass block installation tank, leveling, vertical fixed with a plastic block plug, the same glass wall all installation leveling, vertical before the start of glue injection.

4, glue: first clean the upper and lower parts, side stainless steel glass groove and glass seam glue, and then glue both sides of the glass, stainless steel plate surface with white tape, leaving the glue seam bit? The state regulations require the injection of glue, the same seam a one-time injection scraping flat, without stopping.

5, clean and sanitary: the installed glass block with a special glass cleaner to clean.