Traditional Culture Encyclopedia - Traditional virtues - Wooden door lock cylinder price Wooden door lock cylinder change method steps

Wooden door lock cylinder price Wooden door lock cylinder change method steps

Wooden doors are very common, do you know how to change the lock cylinder of wooden doors? Now many people's homes are using wooden doors, wooden doors are a more elegant and upscale door, this door can be used to make security doors. Wooden door lock cylinder is relatively simple, we only need to go to buy the right lock cylinder can be replaced, because different wooden doors use the lock cylinder are model specifications. Wooden door replacement lock cylinder can also be replaced by yourself Below, I would like to introduce you to the price of wooden door replacement lock cylinder and replacement method.

A, change the wooden door locks generally how much?

We can often hear such questions on the Internet or in conversation with friends, according to my understanding, the price of changing a wooden door lock cylinder is basically in the 50 yuan or so, is not very expensive, but it is recommended that you still buy one of their own to install, if you let the installer installed, meet the good or better, if you want to meet the black hearted master installer, change the cost of wooden door locks It may be in the 100 yuan or so to install. Because the wooden door lock cylinder is the heart of the wooden door, if the installation is not good, it will give the thief the opportunity to take advantage of the situation, so, still need to pay attention to the problem of changing the wooden door lock.

Two, change the wooden door lock steps

1, after the selection of the lock cylinder, spin down the pull panel on the lower two screws, these two screws are mainly fixed panel, as long as you have a good Phillips screwdriver can be completed, and it is very simple.

2, screws screw, put the screws, screw off the lock core to the set of screws on both sides, but pay attention to the installation, do not screw the two screws too tight, so as to avoid the wooden door handle is too tight to open. Remove the handle first, and then remove the lock cap.

3, the lock cylinder to the set of unloading, with the screws together with the good, remember to dismantle the steps, the return is the same. Disassembled all the things are uniformly put away, do not lose.

4, will fix the lock cylinder screws out, remove the lock core, if remove the screws with the hand can not pull out the lock core, we must use the hammer left or right lock knocked down, and try again.

5, in accordance with step 3 method of lock cylinder anti-theft shell installed in the installation of the handle, before the installation of the handle, now will be inserted into the insurance bolt, and then install the handle above.

6, the installation of Heron inside and outside the handle, outside the white hand is best to help someone together to press, both symmetrical catering, and then continue to the next step.

7, adjust the inner and outer handles, must be well coordinated, the screw holes should be aligned with the nut on the other side, or use a flashlight light and then rotate the screws.

8, insert the screws vertically, insert the screws if you can not align the nut inside, please use your fingers to shake the screws, generally rotate the screws of friends can appreciate the screws are aligned.

9, fixed panel, tighten the screws, pay attention to the screws can not be too tight, the handle will be closed to the service, it can not be flexible rotation.

10, the last is to try the effect, must pay attention to open the door and then try, lest be locked out of the door, the door is not repaired and have to start again from scratch. Can be inserted into the key by rotating 360 degrees to twist the insurance, all normal after the side can be handmade.

The above is the wooden door to replace the lock cylinder step by step introduction, we now know how to replace the lock cylinder of the wooden door? There are many brands of wooden doors, there are many brands of wooden doors in our country, different brands of wooden doors use different lock cylinder models, we are in the replacement of the lock cylinder, to understand the lock cylinder model on their doors. There are many kinds of lock cylinders for wooden doors, some wooden door lock cylinders are more anti-theft, some are more simple, different places use different wooden door lock cylinders, we choose to replace the wooden door lock cylinder, according to different occasions to choose.

Tuba Rabbit online free for everyone to provide "each decoration offer, 1-4 local decoration company, 3 sets of decoration design program", and decoration to avoid pit strategy! Click on this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiare&wb, you can get it free of charge~